Issue Section:
Erratum
Topics:
Compressors, Design, Flow (Dynamics)
In the published paper, the expressions listed under (51) were miswritten. The correct version is
(51)
(w2/w1)T<Ctc(WRmin)T/1.3(w2/w1)A<(WRmin)A(w2/w1)H<(WRmin)H/1.3 (w2/w1)T<(WRmin)T/1.3(w2/w1)A<(WRmin)A(w2/w1)H<Ctc(WRmin)H/1.3 
(w2/w1)T<Ctc(WRmin)T/1.3(w2/w1)A<(WRmin)A(w2/w1)H<(WRmin)H/1.3 (w2/w1)T<(WRmin)T/1.3(w2/w1)A<(WRmin)A(w2/w1)H<Ctc(WRmin)H/1.3 
View Large

And the following sentence should be: “Hub and tip minimum velocity ratios are divided by a factor of 1.3 due to the ability of the blade row to operate stably in spite of the presence of corner stall.”

In Eq. (56), member (WRmin)M is wrongly labeled, and it should be replaced with (WRmin)A. The correct version of the equation is
(56)
View Original Article
Copyright © 2021 by ASME