A single stage transonic axial compressor was equipped with a casing treatment consisting of 3.5 axial slots per rotor pitch in order to investigate its influence on stall margin characteristics, as well as on the rotor near tip flow field, both numerically and experimentally. Contrary to most other studies, a generic casing treatment (CT) was designed to provide optimal optical access in the immediate vicinity of the CT, rather than for maximum benefit in terms of stall margin extension. The second part of this two-part paper deals with the numerical developments and their validation, carried out in order to efficiently perform time-accurate casing treatment simulations. The numerical developments focus on the extension of an existing coupling algorithm in order to carry out unsteady calculations with any exterior geometry coupled to the main flow passage (in this case a single slot), having an arbitrary pitch. This extension is done by incorporating frequency domain, phase-lagged boundary conditions into this coupling procedure. Whereas the phase lag approach itself is well established and validated for standard rotor-stator calculations, its application to casing treatment simulations is new. Its capabilities and validation will be demonstrated on the given compressor configuration, making extensive use of the detailed particle image velocimetry flow field measurements near the rotor tip. Instantaneous data at all measurement planes will be compared for different rotor positions with respect to the stationary slots in order to evaluate the time-dependent interaction between the rotor and the casing treatment.
Skip Nav Destination
Article navigation
January 2011
Research Papers
Investigation of Blade Tip Interaction With Casing Treatment in a Transonic Compressor—Part II: Numerical Results
R. Schnell,
R. Schnell
German Aerospace Center (DLR)
, Linder Höhe, 51147 Köln, Germany
Search for other works by this author on:
M. Voges,
M. Voges
German Aerospace Center (DLR)
, Linder Höhe, 51147 Köln, Germany
Search for other works by this author on:
R. Mönig,
R. Mönig
German Aerospace Center (DLR)
, Linder Höhe, 51147 Köln, Germany
Search for other works by this author on:
M. W. Müller,
M. W. Müller
Technische Universität Darmstadt
, Petersenstrasse 30, 64287 Darmstadt, Germany
Search for other works by this author on:
C. Zscherp
C. Zscherp
MTU Aero Engines
, Dachauer Strasse 665, 80995 München, Germany
Search for other works by this author on:
R. Schnell
German Aerospace Center (DLR)
, Linder Höhe, 51147 Köln, Germany
M. Voges
German Aerospace Center (DLR)
, Linder Höhe, 51147 Köln, Germany
R. Mönig
German Aerospace Center (DLR)
, Linder Höhe, 51147 Köln, Germany
M. W. Müller
Technische Universität Darmstadt
, Petersenstrasse 30, 64287 Darmstadt, Germany
C. Zscherp
MTU Aero Engines
, Dachauer Strasse 665, 80995 München, GermanyJ. Turbomach. Jan 2011, 133(1): 011008 (11 pages)
Published Online: September 9, 2010
Article history
Received:
August 27, 2008
Revised:
September 16, 2008
Online:
September 9, 2010
Published:
September 9, 2010
Connected Content
A companion article has been published:
Investigation of Blade Tip Interaction With Casing Treatment in a Transonic Compressor—Part I: Particle Image Velocimetry
Citation
Schnell, R., Voges, M., Mönig, R., Müller, M. W., and Zscherp, C. (September 9, 2010). "Investigation of Blade Tip Interaction With Casing Treatment in a Transonic Compressor—Part II: Numerical Results." ASME. J. Turbomach. January 2011; 133(1): 011008. https://doi.org/10.1115/1.4000490
Download citation file:
Get Email Alerts
A Digital Engineering Analysis of an Additively-Manufactured Turbine Vane
J. Turbomach (May 2025)
Mode Analysis for the Rotating Aerodynamic Disturbance of a Transonic Fan
J. Turbomach (May 2025)
Effect of Ceramic Matrix Composites on the Thermal Efficiency of a Power Generation Turbine
J. Turbomach (May 2025)
Heat Transfer Enhancement in Pulsating Flows: A Bayesian Approach to Experimental Correlations
J. Turbomach (May 2025)
Related Articles
Effect of Scaling of Blade Row Sectors on the Prediction of Aerodynamic Forcing in a Highly Loaded Transonic Compressor Stage
J. Turbomach (April,2011)
Experimental Investigation of a Transonic Aspirated
Compressor
J. Turbomach (April,2005)
The Influence of Turbulence on Wake Dispersion and Blade Row Interaction in an Axial Compressor
J. Turbomach (January,2006)
A Time-Domain Harmonic Balance Method for Rotor/Stator Interactions
J. Turbomach (January,2012)
Related Proceedings Papers
Related Chapters
Other Components and Variations
Axial-Flow Compressors
Outlook
Closed-Cycle Gas Turbines: Operating Experience and Future Potential
Pulsation and Vibration Analysis of Compression and Pumping Systems
Pipeline Pumping and Compression Systems: A Practical Approach, Second Edition