This paper describes a detailed study into the unsteady boundary layer behavior in two high-lift and one ultra-high-lift Rolls-Royce Deutschland LP turbines. The objectives of the paper are to show that high-lift and ultra-high-lift concepts have been successfully incorporated into the design of these new LP turbine profiles. Measurements from surface mounted hot film sensors were made in full size, cold flow test rigs at the altitude test facility at Stuttgart University. The LP turbine blade profiles are thought to be state of the art in terms of their lift and design philosophy. The two high-lift profiles represent slightly different styles of velocity distribution. The first high-lift profile comes from a two-stage LP turbine (the BR710 cold-flow, high-lift demonstrator rig). The second high-lift profile tested is from a three-stage machine (the BR715 LPT rig). The ultra-high-lift profile measurements come from a redesign of the BR715 LP turbine: this is designated the BR715UHL LP turbine. This ultra-high-lift profile represents a 12 percent reduction in blade numbers compared to the original BR715 turbine. The results from NGV2 on all of the turbines show “classical” unsteady boundary layer behavior. The measurements from NGV3 (of both the BR715 and BR715UHL turbines) are more complicated, but can still be broken down into classical regions of wake-induced transition, natural transition and calming. The wakes from both upstream rotors and NGVs interact in a complicated manner, affecting the suction surface boundary layer of NGV3. This has important implications for the prediction of the flows on blade rows in multistage environments.

Issue Section:
Technical Papers
Keywords:
gas turbines, boundary layer turbulence, flow instability, sensors, velocity measurement
Topics:
Blades, Boundary layers, Flow (Dynamics), Nozzle guide vanes, Sensors, Turbines, Wakes, Shear stress, Engines, Turbulence, Rotors
1.
Wisler, D. C., 1997, “The Technical and Economic Relevance of Understanding Boundary Layer Transition in Gas Turbine Engines,” NASA Minnowbrook II proceedings.
2.
Howell, R. J., Ramesh, O. N., Hodson, H. P., Harvey, N. W., and Schulte, V., 2000, “High Lift and Aft Loaded Profiles for Low Pressure Turbines,” ASME Paper No. 2000-GT-261, accepted for publication in ASME J. Turbomach.
3.
Curtis, E. M., Hodson, H. P., Banieghbal, M. R., Denton, J. D., Howell, R. J., and Harvey, N. W., 1996, “Development of Blade Profiles for Low Pressure Turbine Applications,” ASME J. Turbomach.
4.
Hodson, H. P., 1993, “Modelling Unsteady Transition and Its Effects on Profile Loss,” ASME Paper No. 1989.
5.
Ladwig, M., and Fottner, L., 1993, “Experimental Investigations of the Influence of Incoming Wakes on the Losses of a Linear Turbine Cascade,” ASME Paper No. 93-GT-394.
6.
Schubauer, G. B., and Klebanoff, P. S., 1955, “Contributions on the Mechanics of Boundary Layer Transition,” NACA TN 3489 (1955) and NACA Rep. 1289.
7.
Cumpsty, N. A., Dong, Y., and Li, Y. S., 1995, “Compressor Blade Boundary Layers in the Presence of Wakes,” International Gas Turbine Congress.
8.
Gostelow, J. P., Walker, G. J., Solomon, W. J., Hong, G., and Melwani, N., 1996, “Investigation of the Calmed Region Behind a Turbulent Spot,” ASME Paper No. 96-GT-489.
9.
Schulte V., 1995, “Unsteady Wake Boundary Layer Interaction,” Ph.D. thesis, Cambridge University, Cambridge, UK.
10.
Howell R. J., 1999, “Wake Separation Bubble Interactions in Low Reynolds Number Turbomachinery,” Ph.D. thesis, Cambridge University, Cambridge, UK.
11.
Cobley, K., Coleman, N., Siden, G., and Arndt, N., 1997, ‘Design of the new three stage Low Pressure Turbine for the BMW Rolls-Royce BR715 Turbofan Engine,’ ASME Paper No. 97-GT-419.
12.
Harvey, N. W., Cox, J., Howell, R. J., Hodson, H. P., and Schulte, V., 1998, “The Role of Research in the Aerodynamic Design of an Advanced Low-Pressure Turbine,” 3rd European Conference on Turbomachinery Fluid Mechanics and Thermodynamics, Vol. A, IMechE Conf. Trans.
13.
Haselbach, F., Schiffer, H.-P., Horsman, M., Dressen, S., Harvey, N., and Read, S., 2001, “The Application of Ultra-High Lift Blading in the BR715 LP Turbine,” submitted to the IGTI:
14.
Bellhouse
,
B. J.
, and
Schultz
,
D. L.
,
1966
, “
Determination of Mean and Dynamic Skin Friction, Separation and Transition in Low-Speed Flow With a Thin-Film Heated Element
,”
J. Fluid Mech.
24
,
2
2
.
15.
Hodson, H. P., 1983, “Boundary layer and Loss Measurements on the Rotor of an Axial flow Turbine,” ASME Paper No. 83-GT-4.
16.
Davies, M., and O’Donnell, F., 1998, “Local Measurement of Loss Using Heated Thin Film Sensors,” International Gas Turbine Congress.
17.
Halstead, D. E., Wisler D. C., Okiishi, T. H., Hodson, H. P. and Shin, H., 1995, “Boundary Layer Development in Axial Compressors and Turbines, Part 1: Composite Picture, part 2: Compressors, Part 3: Turbines, Part 4: Computations and Analysis,” presented at the IGTI Comference, Houston, TX.
18.
Banieghbal, M. R., Curtis, E. M., Denton, J. D., Hodson, H. P., Huntsman, I., and Schulte, V., 1995, “Wake Passing in LP Turbines,” Paper No. 23, AGARD conference. Loss Mechanisms and Unsteady Flows in Turbomachines, Derby, May.
19.
Hodson, H. P., Huntsman, I., and Steele A. B., 1993, “An investigation of boundary layer development in a multistage LP turbine,” ASME Paper No. 93-GT-310.
20.
Gostelow, J. P., and Hong G., 1995, “Representation of Boundary-Layer Transition and Turbulent Spots in Temporal and Frequency Domains,” Flow Visualisations VII, Begell House, New York, NY, pp. 218–223.
21.
Arndt, N., 1991, “Blade Row Interaction in a Multistage Low Pressure Turbine,” ASME Paper 91-GT-283.
22.
Ramesh, O. N., 2000, private communication.
Copyright © 2002
 by ASME
You do not currently have access to this content.