Abstract
In this study, an experiment is conducted for assessing the friction characteristics of a wet clutch on actual working conditions, to determine how various factors influence the friction coefficient in the actual working process of a wet clutch. Based on the experimental data of a wet clutch under different engagement conditions, a data surrogate model construction method is proposed for the friction coefficient. According to this model, the decoupling between different influencing factors of friction coefficient is realized, and their influence on friction coefficient is obtained. To reveal the change mechanism of the friction coefficient, a theoretical analysis model of the friction coefficient is established by using the elastic contact theory and the elastic fluid dynamic pressure lubrication theory. In addition, based on the constructed friction coefficient data surrogate model, the sensitivity of different influencing factors on the friction coefficient and the coupling relationship between the different influencing factors are studied.
Issue Section:
Hydrodynamic Lubrication
Keywords:
wet clutch,
friction coefficient,
experimental study,
data mining,
clutches,
friction,
surface properties and characterization
Topics:
Friction
References
1.
Banquy
, X.
, Lowrey
, D. D.
, Belman
, N.
, Min
, Y.
, Mordukhovich
, G.
, and Israelachvili
, J. N.
, 2011
, “Measurement and Characterization of “Resonance Friction” at High Sliding Speeds in a Model Automotive Wet Clutch
,” Tribol. Lett.
, 43
(2
), pp. 185
–195
. 10.1007/s11249-011-9793-72.
Li
, M.
, Khonsari
, M.
, and Yang
, R.
, 2018
, “Dynamics Analysis of Torsional Vibration Induced by Clutch and Gear Set in Automatic Transmission
,” Int. J. Automat. Technol.
, 19
(3
), pp. 473
–488
. 10.1007/s12239-018-0046-83.
Kim
, S.
, and Choi
, S.
, 2018
, “Control-Oriented Modeling and Torque Estimations for Vehicle Driveline With Dual-Clutch Transmission
,” Mech. Mach. Theory
, 121
, pp. 633
–649
. 10.1016/j.mechmachtheory.2017.11.0084.
Li
, M.
, Khonsari
, M. M.
, Mccarthy
, D.
, and Lundin
, J.
, 2014
, “Parametric Analysis for a Paper-Based Wet Clutch With Groove Consideration
,” Tribol. Int.
, 80
, pp. 222
–233
. 10.1016/j.triboint.2014.06.0235.
Chen
, L.
, Li
, R.
, Xie
, F.
, and Wang
, Y.
, 2019
, “Load-Bearing Capacity Research in Wet Clutches With Surface Texture
,” Measurement
, 142
, pp. 96
–104
. 10.1016/j.measurement.2019.04.0556.
Zhang
, H.
, Hua
, M.
, Dong
, G.
, Zhang
, D.
, and Chin
, K.
, 2016
, “A Mixed Lubrication Model for Studying Tribological Behaviors of Surface Texturing
,” Tribol. Int.
, 93
, pp. 583
–592
. 10.1016/j.triboint.2015.03.0277.
Nyman
, P.
, Mäki
, R.
, Olsson
, R.
, and Ganemi
, B.
, 2006
, “Influence of Surface Topography on Friction Characteristics in Wet Clutch Applications
,” Wear
, 261
(1
), pp. 46
–52
. 10.1016/j.wear.2005.09.0208.
Matsumoto
, T.
, 1993
, “A Study of the Influence of Porosity and Resiliency of a Paper-Based Friction Material on the Friction Characteristics and Heat Resistance of the Material
,” SAE Technical Papers
, pp. 1
–10
.9.
Ito
, H.
, Fujimoto
, K.
, Eguchi
, M.
, and Yamamoto
, T.
, 1993
, “Friction Characteristics of a Paper-Based Facing for a Wet Clutch Under a Variety of Sliding Conditions
,” Tribol. Trans
, 36
(1
), pp. 134
–138
. 10.1080/1040200930898314210.
Hong
, U. S.
, Jung
, S. L.
, Cho
, K. H.
, Cho
, M. H.
, Kim
, S. J.
, and Jang
, H.
, 2009
, “Wear Mechanism of Multiphase Friction Materials With Different Phenolic Resin Matrices
,” Wear
, 266
(7
), pp. 739
–744
. 10.1016/j.wear.2008.08.00811.
Fei
, J.
, Li
, H. J.
, Fu
, Y. W.
, Qi
, L. H.
, and Zhang
, Y. L.
, 2010
, “Effect of Phenolic Resin Content on Performance of Carbon Fiber Reinforced Paper-Based Friction Material
,” Wear
, 269
(7
), pp. 534
–540
. 10.1016/j.wear.2010.05.00812.
Zhang
, X.
, Li
, K. Z.
, Li
, H. J.
, Fu
, Y. W.
, and Fei
, J.
, 2014
, “Tribological and Mechanical Properties of Glass Fiber Reinforced Paper-Based Composite Friction Material
,” Tribol. Int.
, 69
, pp. 156
–167
. 10.1016/j.triboint.2013.08.00313.
Ingram
, M.
, Spikes
, H.
, Noles
, J.
, and Watts
, R.
, 2010
, “Contact Properties of a Wet Clutch Friction Material
,” Tribol. Int.
, 43
(4
), pp. 815
–821
. 10.1016/j.triboint.2009.11.00814.
Farfán-Cabrera
, L. I.
, Gallardo-Hernández
, E. A.
, Vite-Torres
, M.
, and Laguna-Camacho
, J. R.
, 2015
, “Frictional Behavior of a Wet Clutch Using Blends of Automatic Transmission Fluid (ATF) and Biolubricant (Jatropha Oil) in a Pin-on-Disk Tester
,” Tribol. Trans
, 58
(5
), pp. 941
–946
. 10.1080/10402004.2015.103246115.
Ingram
, M.
, Noles
, J.
, Watts
, R.
, Harris
, S.
, and Spikes
, H. A.
, 2010
, “Frictional Properties of Automatic Transmission Fluids: Part I-Measurement of Friction-Sliding Speed Behavior
,” Tribol. Trans
, 54
(1
), pp. 145
–153
. 10.1080/10402004.2010.53188816.
Zhao
, H.
, Neville
, A.
, Morina
, A.
, Vickerman
, R.
, and Durham
, J.
, 2012
, “Improved Anti-shudder Performance of ATFs—Influence of a New Friction Modifier and Surface Chemistry
,” Tribol. Int.
, 46
(1
), pp. 62
–72
. 10.1016/j.triboint.2011.06.01217.
Fatima
, N.
, Minami
, I.
, Holmgren
, A.
, Marklund
, P.
, and Larsson
, R.
, 2016
, “Surface Chemistry of Wet Clutch Influenced by Water Contamination in Automatic Transmission Fluids
,” Tribol. Int.
, 96
, pp. 395
–401
. 10.1016/j.triboint.2015.04.01018.
Fatima
, N.
, Minami
, I.
, Holmgren
, A.
, Marklund
, P.
, Berglund
, K.
, and Larsson
, R.
, 2015
, “Influence of Water on the Tribological Properties of Zinc Dialkyl-Dithiophosphate and Over-Based Calcium Sulphonate Additives in Wet Clutch Contacts
,” Tribol. Int.
, 87
, pp. 113
–120
. 10.1016/j.triboint.2015.02.00619.
Li
, S.
, Di
, Z.
, Cheng
, L.
, Liu
, Z.
, Piao
, J.
, Huang
, D.
, Zhao
, Z.
, Cui
, H.
, and Li
, Y.
, 2016
, “Surface Chemical Characterization of Steel Clutch Plate in ATF
,” Tribol. Int.
, 102
, pp. 319
–325
. 10.1016/j.triboint.2016.05.04420.
Yoshizumi
, F.
, Tani
, H.
, and Sanda
, S.
, 2019
, “Simulation of the Friction Coefficient of Paper-Based wet Clutch With Wavy Separators
,” ASME J. Tribol.
, 141
(1
), p. 011702
. 10.1115/1.404080621.
Wang
, Y.
, Guo
, C.
, Li
, Y.
, and Li
, G.
, 2018
, “Modelling the Influence of Velocity on Wet Friction-Element Friction in Clutches
,” Ind. Lubr. Tribol.
, 70
(1
), pp. 42
–50
. 10.1108/ILT-09-2016-022322.
Ingram
, M.
, Noles
, J.
, Watts
, R.
, Harris
, S.
, and Spikes
, H. A.
, 2010
, “Frictional Properties of Automatic Transmission Fluids: Part II-Origins of Friction-Sliding Speed Behavior
,” Tribol. Trans.
, 54
(1
), pp. 154
–167
. 10.1080/10402004.2010.53188923.
Wenbin
, L.
, Jianfeng
, H.
, Jie
, F.
, Zhenhai
, L.
, Liyun
, C.
, and Chunyan
, Y.
, 2016
, “Study on Tribological Properties as a Function of Operating Conditions for Carbon Fabric Wet Clutch
,” Tribol. Int.
, 94
, pp. 428
–436
. 10.1016/j.triboint.2015.10.01524.
Senatore
, A.
, D'Agostino
, V.
, Di
, G. R.
, and Petrone
, V.
, 2011
, “Experimental Investigation and Neural Network Prediction of Brakes and Clutch Material Frictional Behaviour Considering the Sliding Acceleration Influence
,” Tribol Int.
, 44
(10
), pp. 1199
–1207
. 10.1016/j.triboint.2011.05.02225.
Mäki
, R.
, Nyman
, P.
, Olsson
, R.
, and Ganemi
, B.
, 2005
, “Measurement and Characterization of Anti-Shudder Properties in Wet Clutch Applications
,” SAE Technical Papers
, pp. 1
–12
.26.
Ingram
, M.
, Ingram
, M.
, Reddyhoff
, T.
, Reddyhoff
, T.
, Spikes
, H. A.
, and Spikes
, H. A.
, 2011
, “Thermal Behaviour of a Slipping Wet Clutch Contact
,” Tribol. Lett.
, 41
(1
), pp. 23
–32
. 10.1007/s11249-010-9669-227.
Ivanović
, V.
, Herold
, Z.
, Deur
, J.
, Hancock
, M.
, and Assadian
, F.
, 2009
, “Experimental Characterization of Wet Clutch Friction Behaviors Including Thermal Dynamics
,” SAE Int. J. Engines
, 2
(1
), pp. 1211
–1220
. 10.4271/2009-01-136028.
Fei
, J.
, Li
, H. J.
, Qi
, L. H.
, Fu
, Y. W.
, and Li
, X. T.
, 2008
, “Carbon-Fiber Reinforced Paper-Based Friction Material: Study on Friction Stability as a Function of Operating Variables
,” ASME J. Tribol.
, 130
(4
), pp. 786
–791
. 10.1115/1.296638829.
Marklund
, P.
, and Larsson
, R.
, 2008
, “Wet Clutch Friction Characteristics Obtained From Simplified Pin on Disc Test
,” Tribol. Int.
, 41
(9–10
), pp. 824
–830
. 10.1016/j.triboint.2007.11.01430.
Jie
, F.
, Wenbin
, L.
, Jianfeng
, H.
, Liyun
, C.
, and Chunyan
, Y.
, 2016
, “Variation of the Tribological Properties of Carbon Fabric Composites in Their Whole Service Life
,” Tribol. Int.
, 99
, pp. 29
–37
. 10.1016/j.triboint.2016.03.00631.
Ost
, W.
, De
, B. P.
, and Degrieck
, J.
, 2001
, “The Tribological Behaviour of Paper Friction Plates for Wet Clutch Application Investigated on SAE#II and Pin-on-Disk Test Rigs
,” Wear
, 249
(5–6
), pp. 361
–371
. 10.1016/S0043-1648(01)00540-332.
Yang
, Y.
, and Lam
, R. C.
, 1998
, “Theoretical and Experimental Studies on the Interface Phenomena During the Engagement of Automatic Transmission Clutch
,” Tribol. Lett.
, 5
(1
), pp. 57
–67
. 10.1023/A:101919633100333.
Sacks
, J.
, Welch
, W. J.
, Mitchell
, T. J.
, and Wynn
, H. P.
, 1989
, “Design and Analysis of Computer Experiments
,” Stat. Sci.
, 4
(4
), pp. 409
–423
. 10.1214/ss/117701241334.
Hardy
, R. L.
, 1971
, “Multiquadric Equations of Topography and Other Irregular Surfaces
,” J. Geophys. Res.
, 76
(8
), pp. 1905
–1915
. 10.1029/JB076i008p0190535.
Cortes
, C.
, and Vapnik
, V.
, 1995
, “Support-Vector Networks
,” Mach. Learn.
, 20
, pp. 273
–297
. 10.1007/bf0099401836.
Theil
, H.
, 1958
, Economic Forecasts and Policy
, North-Holland Pub. Co
, Amsterdam, The Netherlands
.37.
Kenneth
, A. K.
, 1950
, The Friction and Lubrication of Solids
, At The Clarendon Press
, Oxford, UK
.38.
Patir
, N.
, and Cheng
, H. S.
, 1979
, “Application of Average Flow Model to Lubrication Between Rough Sliding Surfaces
,” ASME J. Tribol.
, 101
(2
), pp. 220
–229
. 10.1115/1.345332939.
Greenwood
, J. A.
, and Tripp
, J. H.
, 1970
, “The Contact of Two Nominally Flat Rough Surfaces
,” Proc. Inst. Mech. Eng.
, 185
(1
), pp. 625
–634
.10.1243/pime_proc_1970_185_069_0240.
Berger
, E. J.
, Sadeghi
, F.
, and Krousgrill
, C. M.
, 1997
, “Analytical and Numerical Modeling of Engagement of Rough, Permeable, Grooved Wet Clutches
,” ASME J. Tribol.
, 119
(1
), pp. 143
–148
. 10.1115/1.283245041.
Patir
, N.
, and Cheng
, H. S.
, 1978
, “An Average Flow Model for Determining Effects of Three-Dimensional Roughness on Partial Hydrodynamic Lubrication
,” ASME J. Tribol.
, 100
(1
), pp. 12
–17
. 10.1115/1.345310342.
Sobol
, I. M.
, 1993
, “Sensitivity Estimates for Nonlinear Mathematical Models
,” Mat. Model.
, 1
(1
), pp. 112
–118
.43.
Luo
, J.
, and Lu
, W.
, 2014
, “Sobol′ Sensitivity Analysis of NAPL-Contaminated Aquifer Remediation Process Based on Multiple Surrogates
,” Comput. Geosci.
, 67
, pp. 110
–116
. 10.1016/j.cageo.2014.03.01244.
Song
, X.
, Bryan
, B. A.
, Paul
, K. I.
, and Zhao
, G.
, 2012
, “Variance-Based Sensitivity Analysis of a Forest Growth Model
,” Ecol. Model.
, 247
, pp. 135
–143
. 10.1016/j.ecolmodel.2012.08.00545.
Bates
, D. M.
, and Watts
, D. G.
, 1981
, Nonlinear Regression Analysis and Its Applications
, Wiley
, New York
.Copyright © 2021 by ASME
You do not currently have access to this content.
