We develop a method requiring minimal computations to optimize the fin thickness and spacing in a fully shrouded longitudinal-fin heat sink (LFHS) to minimize its thermal resistance under conditions of hydrodynamically and thermally developed laminar flow. Prescribed quantities are the density, viscosity, thermal conductivity and specific heat capacity of the fluid, the thermal conductivity and height of the fins, the width and length of the heat sink, and the pressure drop across it. Alternatively, the length of the heat sink may be optimized as well. The shroud of the heat sink is assumed to be adiabatic and its base isothermal. Our results are relevant to, e.g., microchannel cooling applications where base isothermality can be achieved by using a heat spreader or a vapor chamber. The present study is distinct from the previous work because it does not assume a uniform heat transfer coefficient, but fully captures the velocity and temperature fields by numerically solving the conjugate heat transfer problem in dimensionless form using an existing approach. We develop a dimensionless formulation and compute a dense tabulation of the relevant parameters that allows the thermal resistance to be calculated algebraically over a relevant range of dimensionless parameters. Hence, the optimization method does not require the time-consuming solution of the conjugate problem. Once the optimal dimensionless fin thickness and spacing are obtained, their dimensional counterparts are computed algebraically. The optimization method is illustrated in the context of direct liquid cooling.
Skip Nav Destination
Article navigation
December 2016
Research-Article
Longitudinal-Fin Heat Sink Optimization Capturing Conjugate Effects Under Fully Developed Conditions
Georgios Karamanis,
Georgios Karamanis
Department of Mechanical Engineering,
Tufts University,
Medford, MA 02155
e-mail: Georgios.Karamanis@tufts.edu
Tufts University,
Medford, MA 02155
e-mail: Georgios.Karamanis@tufts.edu
Search for other works by this author on:
Marc Hodes
Marc Hodes
Search for other works by this author on:
Georgios Karamanis
Department of Mechanical Engineering,
Tufts University,
Medford, MA 02155
e-mail: Georgios.Karamanis@tufts.edu
Tufts University,
Medford, MA 02155
e-mail: Georgios.Karamanis@tufts.edu
Marc Hodes
Contributed by the Heat Transfer Division of ASME for publication in the JOURNAL OF THERMAL SCIENCE AND ENGINEERING APPLICATIONS. Manuscript received January 10, 2016; final manuscript received July 5, 2016; published online August 23, 2016. Assoc. Editor: S. A. Sherif.
J. Thermal Sci. Eng. Appl. Dec 2016, 8(4): 041011 (7 pages)
Published Online: August 23, 2016
Article history
Received:
January 10, 2016
Revised:
July 5, 2016
Citation
Karamanis, G., and Hodes, M. (August 23, 2016). "Longitudinal-Fin Heat Sink Optimization Capturing Conjugate Effects Under Fully Developed Conditions." ASME. J. Thermal Sci. Eng. Appl. December 2016; 8(4): 041011. https://doi.org/10.1115/1.4034339
Download citation file:
Get Email Alerts
Cited By
Numerical Analysis of Enhanced Forced Convection in Perforated Surface Wavy Plate-Fin Core
J. Thermal Sci. Eng. Appl
Design Optimization of a Shell-and-Tube Heat Exchanger based on Variable Baffle Cuts and Sizing
J. Thermal Sci. Eng. Appl
Related Articles
Optimizing a Functionally Graded Metal-Matrix Heat Sink Through Growth of a Constructal Tree of Convective Fins
J. Heat Transfer (August,2016)
Thermal Optimization of a Microchannel Heat Sink With Trapezoidal Cross Section
J. Electron. Packag (June,2009)
A Bejan’s Constructal Theory Approach to the Overall Optimization of Heat Exchanging Finned Modules With Air in Forced Convection and Laminar Flow Condition
J. Heat Transfer (August,2009)
Optimal Arrays of Pin Fins and Plate Fins in Laminar Forced Convection
J. Heat Transfer (February,1993)
Related Proceedings Papers
Related Chapters
Extended Surfaces
Thermal Management of Microelectronic Equipment, Second Edition
Extended Surfaces
Thermal Management of Microelectronic Equipment
Cooling of a Chip Utilizing a Heat Sink with Rectangular Fins
Everyday Heat Transfer Problems: Sensitivities to Governing Variables