Numerical Investigation Into the Gas–Liquid Two-Phase Flow Regime and Heat Transfer Characteristics in a Gravity Heat Pipe

In order to reveal the gas–liquid distribution, heat and mass transfer characteristics inside a gravity heat pipe, the bubble behavior and the flow regime transition during the phase-change process were examined by employing a copper-water heat pipe, with the length of 500 mm and Φ22 × 1.5 mm. The results indicate that in the process of phase change, the typical flow regimes of bubble flow, slug flow, and churn flow can be observed in the evaporator, and the presence of bubbles has an obvious disturbance on the flow field. In addition, the discontinuous liquid film plays an important role in the heat transfer mechanism in the condenser, which allows the vapor to contact the wall directly and reduces the heat transfer resistance. The temperature difference between the evaporator and the condenser can be reduced by adjusting the saturation temperature, so as to effectively improve the heat transfer performance of the heat pipe and contribute to the practical engineering design.