In order to reach the targets on emissions set by the European Commission, both new and existing buildings must reduce their fossil fuel inputs. Solar thermal cooling supplying on-site renewable heating and cooling could potentially contribute toward this goal. In this paper, a novel concept for solar thermal cooling providing efficient coproduction of cooling and heating based on sorption integrated vacuum tube collectors is proposed. A prototype collector has been constructed and tested in a solar laboratory based on a method developed specifically for sorption integrated collectors. From the test results, the key performance parameters have been determined and used to calibrate a mathematical model for trnsys environment. System simulation has been conducted to optimize the collector and sorption module configuration by performing a parametric study where different vacuum tube center–center (C–C) distances and sorption module designs are tested for a generic hotel in Ankara, Turkey. The parametric study showed that the heating and cooling output per year can be as high as 1000 kWh/m2 for solar fractions above 50%, and that the output per sorption module compared to the prototype can more than double with an optimized design. Furthermore, cooling conversion efficiencies defined as total cooling output per total solar insolation can be as high as 26% while simultaneously converting 35–40% of the incident solar energy into useful hot water.
Skip Nav Destination
Article navigation
April 2017
Research-Article
Design Optimization of a Sorption Integrated Sydney Type Vacuum Tube Collector
Olof Hallström
Olof Hallström
School of Business, Society and Engineering,
Mälardalen University,
Box 883,
Västerås 721 23, Sweden
Mälardalen University,
Box 883,
Västerås 721 23, Sweden
Search for other works by this author on:
Olof Hallström
School of Business, Society and Engineering,
Mälardalen University,
Box 883,
Västerås 721 23, Sweden
Mälardalen University,
Box 883,
Västerås 721 23, Sweden
Contributed by the Solar Energy Division of ASME for publication in the JOURNAL OF SOLAR ENERGY ENGINEERING: INCLUDING WIND ENERGY AND BUILDING ENERGY CONSERVATION. Manuscript received June 27, 2016; final manuscript received September 15, 2016; published online November 10, 2016. Assoc. Editor: Jorge E. Gonzalez.
J. Sol. Energy Eng. Apr 2017, 139(2): 021007 (11 pages)
Published Online: November 10, 2016
Article history
Received:
June 27, 2016
Revised:
September 15, 2016
Citation
Hallström, O. (November 10, 2016). "Design Optimization of a Sorption Integrated Sydney Type Vacuum Tube Collector." ASME. J. Sol. Energy Eng. April 2017; 139(2): 021007. https://doi.org/10.1115/1.4034912
Download citation file:
Get Email Alerts
Cited By
Mass Flow Control Strategy for Maximum Energy Extraction in Thermal Energy Storage Tanks
J. Sol. Energy Eng (December 2025)
Exergy Optimization of a Hybrid Multi-Evaporative Desalination Plant Powered by Solar and Geothermal Energy
J. Sol. Energy Eng (June 2025)
Correlation for Maximum Heat Transfer Between Fluidized Bed and Its Wall and Application to Solar Power Plants
J. Sol. Energy Eng (June 2025)
Related Articles
Small Changes Yield Large Results at NIST's Net-Zero Energy Residential Test Facility
J. Sol. Energy Eng (December,2017)
Evaluation of Thermo-Active Foundations for Heating and Cooling Residential Buildings
J. Sol. Energy Eng (December,2016)
Study on the Performance of a Curved Fresnel Solar Concentrated System With Seasonal Underground Heat Storage for the Greenhouse Application
J. Sol. Energy Eng (February,2019)
Analysis of Numerical Error in One-Dimensional Storage Tank Models for Solar Energy System Simulations
J. Sol. Energy Eng (October,2018)
Related Proceedings Papers
Related Chapters
Integration of Solar Energy Systems
Handbook of Integrated and Sustainable Buildings Equipment and Systems, Volume I: Energy Systems
Scope of Section I, Organization, and Service Limits
Power Boilers: A Guide to the Section I of the ASME Boiler and Pressure Vessel Code, Second Edition
Development of Nuclear Boiler and Pressure Vessels in Taiwan
Global Applications of the ASME Boiler & Pressure Vessel Code