The present paper presents results of numerical simulation for statistical evaluation of stress and strain at elevated temperature from view point of crystal plasticity level by employing a new Voronoi tessellation algorithm in the three dimensional geometry for general grain shape using first order tetrahedron element (four nodes). The elasticity tensors are assumed to include isotropic material and anisotropic material of FCC or BCC crystal using three material constant parameters. The employed finite element formulation is based on the updated Lagrange type expressed in the general form using trapezoidal integration rule in time domain, and the selective numerical integration scheme is used in the present analysis. The obtained numerical examples include the effects of employed finite elements, employed grain aggregate model, grain diameter size, and grain regularity on local stress. The statistical variation around mean value is investigated for the isotropic material and the anisotropic materials having different anisotropy ratio A in elastic range. The inelastic analysis at elevated temperature is also carried out for the anisotropic materials in order to investigate the statistical variation for the anisotropic materials in strain rate effect problem and creep strain program by introducing additional six cubic slip systems into the conventional 12 octahedral slip systems inelastic range.
Skip Nav Destination
Article navigation
February 2012
Research Papers
Statistical Evaluation of Local Stress and Strain of Three Dimensional Polycrystalline Material at Elevated Temperature
Osamu Watanabe
Osamu Watanabe
Department of Engineering Mechanics and Energy
University of Tsukuba
Tsukuba, Ibaraki 305-8573, Japan
Search for other works by this author on:
Osamu Watanabe
Department of Engineering Mechanics and Energy
University of Tsukuba
Tsukuba, Ibaraki 305-8573, Japan
J. Pressure Vessel Technol. Feb 2012, 134(1): 011208 (16 pages)
Published Online: December 2, 2011
Article history
Received:
July 15, 2010
Revised:
June 29, 2011
Accepted:
June 30, 2011
Online:
December 2, 2011
Published:
December 2, 2011
Citation
Watanabe, O. (December 2, 2011). "Statistical Evaluation of Local Stress and Strain of Three Dimensional Polycrystalline Material at Elevated Temperature." ASME. J. Pressure Vessel Technol. February 2012; 134(1): 011208. https://doi.org/10.1115/1.4004795
Download citation file:
50
Views
Get Email Alerts
Cited By
The Behavior of Elbow Elements at Pure Bending Applications Compared to Beam and Shell Element Models
J. Pressure Vessel Technol (February 2025)
Related Articles
Development of the Damage State Variable for a Unified Creep Plasticity Damage Constitutive Model of the 95.5Sn–3.9Ag–0.6Cu Lead-Free Solder
J. Electron. Packag (March,2008)
Inelastic Analysis of Nonaxisymmetrically Heated Thick Cylindrical Shells
J. Pressure Vessel Technol (August,1979)
Prediction of Elastic-Plastic Boundary Around Cold-Expanded Holes Using Elastic Strain Measurement
J. Eng. Mater. Technol (July,2010)
Crystal Plasticity Based Fe Model for Understanding Microstructural Effects on Creep and Dwell Fatigue in Ti-6242
J. Eng. Mater. Technol (July,2006)
Related Proceedings Papers
Related Chapters
Analysis of Components Strain and Deformation-Controlled Limits
Analysis of ASME Boiler, Pressure Vessel, and Nuclear Components in the Creep Range
Analysis of Components: Strain- and Deformation-Controlled Limits
Design & Analysis of ASME Boiler and Pressure Vessel Components in the Creep Range
Polycrystalline Simulations of In-Reactor Deformation of Zircaloy-4 Cladding Tubes during Nominal Operating Conditions
Zirconium in the Nuclear Industry: 20th International Symposium