The feasibility of an absolute ultrasonic measurement of the tightening force in bolts was investigated. For this purpose, we used both longitudinal and transverse ultrasonic waves (bi-wave method) to remove the time-of-flight measurement of waves in the unstressed state. To avoid the systematic calibration tests (generally carried out before tightening control), an experimental method has been applied. This method allows determination of the effective length under stress and the difference between longitudinal and transverse acoustoelastic coefficients of a tightened bolt. The results show that the proposed method can provide absolute measurement of the tightening force without either loosening the bolt or performing systematically calibration tests with an uncertainty estimated on the order of ±10% at 95% reliability.

Issue Section:
Research Papers
Keywords:
ultrasound, acoustoelasticity, bolt load detection, longitudinal acoustic waves, transverse acoustic waves, fasteners, ultrasonic measurement, calibration, elasticity, stress analysis
Topics:
Calibration, Flight, Stress, Ultrasonic measurement, Ultrasonic waves, Waves, Acoustics
1.
Suda
,
M.
,
Hasuo
,
Y.
,
Kanaya
,
A.
,
Ogura
,
Y.
,
Takishita
,
T.
, and
Suzuki
,
Y.
, 1992, “
Development of Ultrasonic Axial Bolting Force Inspection System for Turbine Bolts in Thermal Power Plants
,”
JSME Int. J., Ser. I
0914-8809
35
(
2
), pp.
216
–
219
.
2.
Yasui
,
H.
,
Tanaka
,
H.
,
Fujii
,
I.
, and
Kawashima
,
K.
, 1999, “
Ultrasonic Measurement of Axial Stress Bolts With Consideration of Nonlinear Deformation
,”
JSME Int. J., Ser. A
1340-8046
42
(
1
), pp.
111
–
118
.
Crossref
Search ADS
 
3.
Johnson
,
G. C.
,
Albert
,
C. H.
, and
Cunningham
,
B.
, 1986, “
An Ultrasonic Method for Determining Axial Stress in Bolts
,”
J. Test. Eval.
0090-3973, JTEVA,
14
(
5
), pp.
253
–
259
.
4.
Cunningham
,
B.
,
Holt
,
A. C.
, and
Johnson
,
G. C.
, 1987, “
Sensitivity of Ultrasonic Technique for Axial Stress determination
,”
Proc of the Rev. of Prog. In Quantitative NDE
,
7
, p.
1405
.
5.
Yasui
,
H.
, and
Kawashima
,
K.
, 2000, “
Acoustoelastic Measurement of Bolt Axial Load With Velocity Ratio Method
,”
Proceedings WCNDT
,
Rome, Italy
, October 16–21.
6.
Walaszek
,
H.
,
Hoblos
,
J.
,
Bourse
,
G.
,
Robin
,
C.
,
Bouteille
,
P.
, and
Lieurade
,
H. P.
, 2005 “
Ultrasonic Stress Measurement: Application to Welded Joints and Bolt Tightening Assessment
,”
Proceedings COFREND Congress
,
Beaune, France
, May.
7.
Ogi
,
H.
,
Hirao
,
M.
, and
Fukuoka
,
H.
, “
Noncontacting Ultrasonic Measurement of Bolt Axial Stress With Electromagnetic Acoustic Transducer
,” 1996,
Proceedings 1st US-JAPAN Symposition on Advances in NDT
,
Oahu, Hawaii
, June 24–28.
8.
Ogi
,
H.
, and
Hirao
,
M.
, 1998, “
Electromagnetic Acoustic Spectroscopy in the Bolt Head for Evaluating the Axial Stress
,”
Nondestructive Characterization of Material VIII
,
R. E.
Green
, Jr., ed.,
Plenum
,
New York, NY
, pp.
671
–
676
.
9.
Hirao
,
M.
,
Ogi
,
H.
, and
Yasui
,
H.
, 2001, “
Contactless Measurement of Bolt Axial Stress Using a Shear-Wave Electromagnetic Acoustic Transducer
,”
NDT & E Int.
0963-8695,
34
, pp.
179
–
183
.
Crossref
Search ADS
 
10.
Bobrenko
,
V. M.
, and
Averbukh
,
I. I.
, 1974, “
Ultrasonic Method of Measuring Stresses in Parts of Threaded Joints
,”
Sov. J. Nondestruct. Test.
0038-5492
10
(
1
), pp.
59
–
66
.
11.
Hughes
,
D. S.
, and
Kelly
,
J. L.
, 1953, “
Second-Order Deformation of Solids
,”
Phys. Rev.
0031-899X,
92
(
5
), pp.
1145
–
1149
.
Crossref
Search ADS
 
12.
Bry
,
D. E.
, 1975, “
Measurement of Longitudinal Stresses in Railroad Rails by Acoustic Wave Velocity
,”
Proceedings Workshop Non-destructive Eval Residual Stress
,
San Antonio, Texas
, 13–14 August, pp.
187
–
195
.
13.
Schneider
,
E.
,
Goebbels
,
K.
, and
Hûbschen
,
G.
, 1980, “
Stress Measurements With Time-of-Flight-Independent Ultrasonic Methods, Colloque sur les Méthodes Ultrasonores en Contrôle Non Destructif
,”
Rev. Cethedec
,
17
(
4
), pp.
155
–
169
, March.
14.
Rollins
,
F. R.
, 1977, “
Ultrasonic Analysis of Bolt Preloads
,”
Int. Adv. Nondestr. Test.
0140-072X,
5
, pp.
229
–
253
.
15.
Chaki
,
S.
,
Moysan
,
J.
,
Lillamand
,
I.
,
Corneloup
,
G.
, and
Walaszek
,
H.
, 2002, “
Improvement of Ultrasonic Method for Evaluating Tightening of Non-Loosabale Bolted Systems
,”
Proceedings 8th ECNDT
,
Barcelona, Spain
, 17–21 June.
16.
Danthez
,
J.-M.
, 1988, “
Réponse Spatio-Temporelle d’un Guide Cylindrique Solide à un Faisceau Ultrasonore: Application à la Mesure des Tensions Résiduelles de Serrage Dans les Assemblages Boulonnés
,”
Thèse de l’Université Bordeaux
, Vol.
1
, 201, p.
82
.
17.
Rose
,
J. L.
, 1999,
Ultrasonic Waves in Solid Media
,
Cambridge University
,
Cambridge, UK
, p.
454
.
Copyright © 2007
 by American Society of Mechanical Engineers
You do not currently have access to this content.