This paper presents an energy based approach to functional decomposition that is applicable to the top down design (system to subsystems to components) of mechanical systems. The paper shows that the main functions of convert and transmit are sufficient to focus on the “functional flow” or main energy flow resulting in the specific action sought as a result of the artifact being designed, and can be expanded upon at the lowest level when looking for specific solutions based upon the energy and mass balances and the knowledge within the design team. This approach considers function as a transformation and also fits the approach presented in TRIZ. The standard energy, material, and signal flows are seen as forms of energy flows, and it is only their transformation and transmission that is sought. This simplified approach, coupled with an aspect of control and interaction between a reference state and the artifact or between various components is sufficient to comprehensively describe the system that matches very nicely the value function approach of Miles. Furthermore, as these interactions can be considered as artifact-artifact affordances when considering the artifact for either artifact interaction or within an environment, its relation to the user and to the reference state can be addressed during the design phase, in addition to the functions.
Issue Section:
Research Papers
References
1.
Suh
, N. P.
, 1990, The Principles of Design
, Oxford University Press
, New York
.2.
Tomiyama
, T.
, Gu
, P.
, Jin
, Y.
, Lutters
, D.
, Kind
, C.
, and Kimura
, F.
, 2009, “Design Methodologies: Industrial and Educational Applications,”
CIRP Ann.
, 58
(2
), pp. 543
–565
.3.
Pahl
, G.
, and Beitz
, W.
, 1988, Engineering Design: A Systematic Approach
, Design Council
, London
.4.
Ullman
, D.
, 2003, The Mechanical Design Process
, McGraw-Hill
, Boston
.5.
Whitfield
, R.
, Smith
, J.
, and Duffy
, A.
, 2002, “Identifying Component Modules,”
Seventh International Conference on Artificial Intelligence in Design, AID’02
, Cambridge, United Kingdom
.6.
Holmqvist
, T. K.
, and Persson
, M. L.
, 2003, “Analysis and Improvement of Product Modularization Methods: Their Ability to Deal with Complex Products,”
Syst. Eng.
, 6
(3
), pp. 195
–209
.7.
Scaravetti
, D.
, Nadeau
, J. P.
, Pailhes
, J.
, and Sebastian
, P.
, 2005, “Structuring of Embodiment Design Problem Based on the Product Lifecycle,”
Int. J. Prod. Dev.
, 2
(1
), pp. 47
–70
.8.
Gero
, J. S.
, 1990, “Design Prototypes: A Knowledge Representation Schema for Design,”
AI Mag.
, 11
(4
), p. 26
.9.
Szykman
, S.
, Racz
, J. W.
, and Sriram
, R. D.
, 1999, “The Representation of Function in Computer-Based Design,”
Proceedings of the 1999 ASME Design Engineering Technical Conferences
, Las Vegas
.10.
Stone
, R. B.
, and Wood
, K. L.
, 2000, “Development of a Functional Basis for Design,”
J. Mech. Des.
, 122
(4
), pp. 359
–370
.11.
Bo
, Y.
, and Salustri
, F. A.
, 1999, “Function Modeling Based on Interactions of Mass, Energy and Information,”
Proceedings of the 12th Florida Artificial Intelligence Research Symposium
.12.
Stone
, R. B.
, Wood
, K. L.
, and Crawford
, R. H.
, 2000, “A Heuristic Method for Identifying Modules for Product Architectures,”
Des. Stud.
, 21
(1
), pp. 5
–31
.13.
Kirschman
, C. F.
, Fadel
, G. M.
, and Jara-Almonte
, C.
, 1998, “Classifying Functions for Mechanical Design,”
J. Mech. Des.
, 120
(3
), pp. 475
–482
.14.
Otto
, K. N.
, and Wood
, K. L.
, 2001, Product Design: Techniques in Reverse Engineering and New Product Development
, Prentice Hall
, New York
.15.
Stone
, R. B.
, 1997, “Towards a Theory of Modular Design
,” Doctoral Thesis, The University of Texas at Austin, Texas, USA.16.
Henderson
, M. R.
, and Taylor
, L. R.
, 1993, “A Meta-model for Mechanical Products Based upon the Mechanical Design Process,”
Res. Eng. Des.
, 5
(3
), pp. 140
–160
.17.
Hirtz
, J.
, Stone
, R. B.
, McAdams
, D. A.
, Szykman
, S.
, and Wood
, K. L.
, 2001, “A Functional Basis for Engineering Design: Reconciling and Evolving Previous Efforts,”
Res. Eng. Des.
, 13
(2
), pp. 65
–82
.18.
Böhm
, M.
, Stone
, R.
, and Szykman
, S.
, 2005, “Enhancing Virtual Product Representations for Advanced Design Repository Systems,”
J. Comput. Inf. Sci. Eng.
, 5
(4
), pp. 360
–372
.19.
Sallaou
, M.
, Pailhes
, J.
, and Nadeau
, J.-P.
, 2005, “Formulation d’une Base de Connaissance pour l’aide à la Décision en Conception,”
4éme Conférence Internationale Conception et Production Intégrée, CPI 2005, Casablanca
.20.
Pailhès
, J.
, Sallaou
, M.
, and Nadeau
, J. P.
, 2007, “Knowledge Base Formulation for Aided Design Tool,”
in Advances in Integrated Design and Manufacturing in Mechanical Engineering II
, Springer
, Dordrecht
, pp. 231
–243
.21.
Callen
, H. B.
, 1985, Thermodynamics and an Introduction to Thermostatistics
, John Wiley & Sons
, New York
.22.
Torby
, B.
, 1984, Energy Methods, Advanced Dynamics for Engineers, HRW Series in Mechanical Engineering
, CBS College Publishing
, New-York
.23.
Thompson
, F.
, and Haywood
, G. G.
, 1986, Structural Analysis Using Virtual Work
, CRC Press
, London
.24.
Altshuller
, G.
, and Altov
, H.
, 1996, And Suddenly the Inventor Appeared: Triz, the Theory of Inventive Problem Solving
, Technical Innovation Center
, Worcester
.25.
Savransky
, S. D.
, 2000, Engineering of Creativity: Introduction to TRIZ Methodology of Inventive Problem Solving
, CRC Press
, Boca Raton, FL
.26.
Cavaillès
, J.
, 1992, Méthodes de Management de Programme
, 2nd ed., DGA-Teknea
, Toulouse
.27.
Maier
, J. R.
, and Fadel
G. M.
, 2001, “Affordance: The Fundamental Concept in Engineering Design,”
Proceedings of ASME Design Theory and Methodology Conference, Pittsburgh, PA. Paper No. DETC2001/DTM-21700
.28.
Maier
, J. R.
, and Fadel
, G. M.
, 2002, “Comparing Function and Affordance as Bases for Design,”
Proceedings of ASME Design Theory and Methodology Conference
, Montreal, Canada
, Paper No. DETC2002/DTM-34029.29.
Maier
, J. R. A.
, and Fadel
, G. M.
, 2003, “On the Complexity of the Designer-Artifact-User System,”
Proceedings of the 14th International Conference on Engineering Design ICED03
, pp. 603
,604.30.
Maier
, J. R.
, and Fadel
, G. M.
, 2003, “Affordance-based Methods for Design,”
Proceedings of ASME Design Theory and Methodology Conference
, Chicago
, Paper No. DETC2003/DTM-48673.31.
Maier
, J. R.
, “Foundations of Affordance Based Design
,” Ph.D. Dissertation, Department of Mechanical Engineering, Clemson University.32.
Maier
, J. R.
, and Fadel
, G. M.
, 2005, “A Case Study Contrasting German Systematic Engineering Design With Affordance Based Design,”
Proceedings of ASME Design Theory and Methodology Conference
, Long Beach
, Paper No. DETC2005/DTM-84954.33.
Maier
, J.
, and Fadel
, G.
, 2006, “Understanding the Complexity of Design,”
Complex Engineered Systems: Science Meets Technology
, Springer
, Dordrecht
, pp. 122
–140
.34.
Maier
, J. R. A.
, and Fadel
, G.
, 2007, “Identifying Affordances,”
Proceedings of the 16th International Conference on Engineering Design (ICED07)
, Paris
, pp. 841
,842.35.
Gibson
, J. J.
, 1977, “The Theory of Affordances,”
The Ecological Approach to Visual Perception
, Houghton Mifflin
, Hopewell, NJ
.36.
Norman
, D. A.
, 2002, The Design of Everyday Things
, Basic Books
, New York
.37.
AFAV, 1989,
Exprimer le Besoin Applications de la Démarche Fonctionnelle, Association Française pour l’Analyse de la Valeur
, Paris.38.
Sallaou
, M.
, 2008, “Taxonomie des Connaissances et Exploitation en Conception Préliminaire: Application à un Système Éolien,”
Thèse de doctorat, l’Ecole Nationale Supérieure d’Arts, Métiers
.39.
Caldwell
, B. W.
, Chiradeep
, S.
, Mocko
, G. M.
, and Summers
, J. D.
, 2010, “An Empirical Study of the Expressiveness of the Functional Basis,”
Artificial Intelligence for Engineering Design, Analysis and Manufacturing
, Journal AI EDAM, Cambridge University Press
, pp. 1
–15
.40.
Ammar
, A.
, Scaravetti
, D.
, and Nadeau
, J.-P.
, “Knowledge Capitalizing and Analyzing Heart the Design of Manufacturing Processes,”
Proceedings of the Third International Congress Design Modelling and of Mechanical Systems, (CMSM’09)
, Hammamet
, Tunisia
.41.
Leung
, P.
, Ishii
, K.
, and Benson
, J.
, 2005, “Modularization of Work Tasks for Global Engineering,”
Proceedings of IMECE2005, 2005 ASME International Mechanical Engineering Congress and Exposition
, Orlando, FL, United States
, pp. 5
–11
.Copyright © 2011
by American Society of Mechanical Engineers
You do not currently have access to this content.
