Abstract
The Kutzbach–Grübler mobility criterion calculates the degrees of freedom of a general mechanism. However, the criterion can break down for mechanisms with special geometries, and in particular, the class of so-called overconstrained parallel mechanisms. The problem is that the criterion treats all constraints as active, even redundant constraints, which do not affect the mechanism degrees of freedom. In this paper we reveal a number of screw systems of a parallel mechanism, explore their inter-relationship and develop an original theoretical framework to relate these screw systems to motion and constraints of a parallel mechanism to identify the platform constraints, mechanism constraints and redundant constraints. The screw system characteristics and relationships are investigated for physical properties and a new approach to mobility analysis is proposed based on decompositions of motion and constraint screw systems. New versions of the mobility criterion are thus presented to eliminate the redundant constraints and accurately predict the platform degrees of freedom. Several examples of overconstrained mechanisms from the literature illustrate the results.
Issue Section:
Research Papers
1.
Bricard
, M. R.
, 1897, “Memoire sur la theorie de l’octaedre articule
,” J. Math. Pures Appl.
0021-7824, LXII
, pp. 113
–148
.2.
Gough
, V. E.
, and Whitehall
, S. G.
, 1961, “Universal Tire Test Machine
,” Proceedings of the International Technical Congress FISITA
, May, 1961, Institution of Mechanical Engineers
, UK, p. 117
.3.
Stewart
, D.
, 1965, “A Platform with Six Degrees of Freedom
,” Proc. Inst. Mech. Eng.
0020-3483, 180
, 1965, pp. 371
–386
.4.
Earl
, C. F.
, and Rooney
, J.
, 1983, “Some Kinematic Structures for Robot Manipulator Design
,” ASME J. Mech., Transm., Autom. Des.
0738-0666, 105
, pp. 15
–22
.5.
Hunt
, K. H.
, 1983, “Structural Kinematics of In-Parallel-Actuated Robot-Arms
,” ASME J. Mech., Transm., Autom. Des.
0738-0666, 105
, pp. 705
–712
.6.
Mohamed
, M. G.
, and Duffy
, J.
, 1985, “A Direct Determination of the Instantaneous Kinematics of Fully Parallel Robot Manipulators
,” ASME J. Mech., Transm., Autom. Des.
0738-0666, 107
, pp. 226
–229
.7.
Fichter
, E. F.
, 1986, “A Stewart Platform-Based Manipulator: General Theory and Practical Construction
,” Int. J. Robot. Res.
0278-3649, 5
, pp. 157
–182
.8.
Waldron
, K. J.
, Raghavan
, M.
, and Roth
, B.
, 1989, “Kinematics of a Hybrid Series-Parallel Manipulation System
,” ASME J. Dyn. Syst., Meas., Control
0022-0434, 111
, pp. 211
–221
.9.
Gosselin
, C.
, and Angeles
, J.
, 1987, “The Optimum Kinematic Design of A Spherical Three-Degree-of-Freedom Parallel Manipulator
,” Proceedings of the 13th ASME Design Automation Conference
, Sept. 1987, Boston, pp. 111
–115
.10.
Gosselin
, C.
, 1990, “Stiffness Mapping for Parallel Manipulators
,” IEEE Trans. Rob. Autom.
1042-296X, 6
, pp. 377
–82
.11.
Dai
, J. S.
, Sodhi
, C.
, and Kerr
, D. R.
, 1994, “Design and Analysis of a New Six-Component Force Transducer Based on the Stewart Platform for Robotic Grasping
,” Proceedings of the Second Biennial European Joint Conference on Engineering Systems Design and Analysis
, ASME PD Vol. 64
, No. 8-3, London, pp. 809
–817
.12.
Kumar
, V.
, 1992, “Characterization of Workspaces of Parallel Manipulators
,” ASME J. Mech. Des.
1050-0472, 114
, pp. 368
–375
.13.
Wang
, J.
, and Gosselin
, C. M.
, 1998, “Kinematic Analysis of Singularity Loci of Spatial Four-Degree-of-Freedom Parallel Manipulators Using a Vector Formulation
,” ASME J. Mech. Des.
1050-0472, 120
, pp. 555
–558
.14.
Huang
, Z.
, Fang
, Y. F.
, and Kong
, L. F.
, 1997, Theory and Control of Parallel Robotic Mechanisms
, published by Mechanical Engineering Publisher
, Beijing.15.
Hervé
, J. M.
, 1978, “Analyse Structurelle Des Mecanismes Par Groupe des Deplacements
,” Mech. Mach. Theory
0094-114X, 13
, pp. 437
–450
.16.
Husain
, M.
, and Waldron
, K. J.
, 1992, “Position Kinematics of a Mixed Mechanism
,” “Proceedings of the ASME 22nd Biennial Mechanisms Conference
,” DE-Vol 45
, pp. 41
–47
.17.
Ebert-Uphoff
, I.
, Lee
, J.-K.
, and Lipkin
, H.
, 2002, “Characteristic Tetrahedron of Wrench Singularities for Parallel Manipulators with Three Legs
,” Chin. J. Mech. Eng.
0577-6686, 216
, pp. 81
–93
.18.
Jin
, Q.
, and Yang
, T.-L.
, 2004, “Synthesis and Analysis of a Group of 3-Degree-of-Freedom Partially Decoupled Parallel Manipulators
,” ASME J. Mech. Des.
1050-0472, 126
, pp. 301
–306
.19.
Pfreundschuh
, G. H.
, Kumar
, V.
, and Sugar
, T. H.
, 1991, “Design and Control of a Three-Degree-of-Freedom In-Parallel Actuated Manipulators
,” Proceedings of the IEEE International Conference on Robotics and Automation
, pp. 1659
–1664
.20.
Tsai
, L. W.
, 1996, “Kinematics of a Three-DOF Platform with Three Extensible Limbs
,” in Recent Advances in Robot Kinematics
, J.
Lenarcic
and V.
Parenti-Castellie
(Kluwer Academic
, New York, pp. 401
–410
.21.
Huang
, Z.
, Fang
, Y. F.
, and Fang
, Y. F.
, 1996, “Studying on the Kinematic Characteristics of 3-DOF In-Parallel Actuated Platform Mechanisms
,” Mech. Mach. Theory
0094-114X, 31
, pp. 1009
–1018
.22.
Wang
, J.
, and Gosselin
, C. M.
, 2004, “Singularity Loci of a Special Class of Spherical 3-DOF Parallel Mechanisms with Prismatic Actuators
,” ASME J. Mech. Des.
1050-0472, 126
, pp. 319
–326
.23.
Badescu
, M.
, and Mavroidis
, C.
, 2004, “Workspace Optimization of 3-Legged UPU and UPS Parallel Platforms with Joint Constraints
,” ASME J. Mech. Des.
1050-0472, 126
, pp. 291
–300
.24.
Su
, H.-J.
, Dietmaier
, P.
, and McCarthy
, J. M.
, 2003, “Trajectory Planning for Constrained Parallel Manipulators
,” ASME J. Mech. Des.
1050-0472, 125
, pp. 709
–716
.25.
Carricato
, M.
, and Parenti-Castelli
, V.
, 2003, “A Family of 3-DOF Translational Parallel Manipulators
,” ASME J. Mech. Des.
1050-0472, 125
, pp. 302
–307
.26.
Callegari
, M.
, and Tarantini
, M.
, 2003, “Kinematic Analysis of a Novel Translational Platform
,” ASME J. Mech. Des.
1050-0472, 125
, pp. 308
–315
.27.
Ball
, R. S.
, 1900, A Treatise on the Theory of Screws
, Cambridge University Press
, Cambridge.28.
Hunt
, K. H.
, 1978, Kinematic Geometry of Mechanisms
, Oxford University Press
, London.29.
Davidson
, J. K.
, and Hunt
, K. H.
, 2004, Robots and Screw Theory: Applications of Kinematics and Statics to Robotics
, Oxford University Press
, Oxford.30.
Agrawal
, S. K.
, 1991, “Study of An In-Parallel Mechanism Using Reciprocal Screws
,” Proceeding of the 8th World Congress on TMM
, Prague, August, pp. 405
–408
.31.
Lee
, J.
, Duffy
, J.
, and Keler
, M.
, 1999, “The Optimum Quality Index for the Stability of In-Parallel Planar Platform Devices
,” ASME J. Mech. Des.
1050-0472, 121
, pp. 15
–22
.32.
Huang
, Z.
, and Li
, Q. C.
, 2002, “General Methodology for Type Synthesis of Lower-Mobility Symmetrical Parallel Manipulators and Several Novel manipulators
,” Int. J. Robot. Res.
0278-3649, 21
, pp. 131
–145
.33.
Li
, Q. C.
, and Huang
, Z.
, 2003, “A Family of Symmetrical Lower-Mobility Parallel Mechanism with Spherical and Parallel Subchains
,” J. Rob. Syst.
0741-2223, 20
, pp. 297
–305
.34.
Zhao
, T. S.
, Dai
, J. S.
, and Huang
, Z.
, 2002, “Geometric Analysis of Overconstrained Parallel Manipulators with Three and Four Degrees of Freedom
,” JSME Int. J., Ser. C
1340-8062, 45
, pp. 730
–740
.35.
Zhao
, T. S.
, Dai
, J. S.
, and Huang
, Z.
, 2002, “Geometric Synthesis of Spatial Parallel Manipulators with Fewer Than Six Degrees of Freedom
,” J. Mech. Eng. Sci.
0022-2542, 216
, pp. 1175
–1186
.36.
Kong
, X.
, and Gosselin
, C. M.
, 2001, “Generation of Parallel Manipulators with Three Translational Degrees of Freedom Based on Screw Theory
,” Proceedings of the 2001 CCToMM Symposium on Mech, Machines and Mechatronics
, Saint-Hubert, Montreal.37.
Kong
, X.
, and Gosselin
, C. M.
, 2004, “Type Synthesis of 3-DOF Spherical Parallel Manipulators Based on Screw Theory
,” ASME J. Mech. Des.
1050-0472, 126
, pp. 101
–108
.38.
Fang
, Y.
, and Tsai
, L. W.
, 2002, “Structure Synthesis of a Class of 4-DOF and 5-DOF Parallel Manipulators with Identical Limb Structures
,” Int. J. Robot. Res.
0278-3649, 21
, pp. 799
–810
.39.
Joshi
, S. A.
, and Tsai
, L. W.
, 2002, “Jacobian Analysis of Limited-DOF Parallel Manipulators
,” ASME J. Mech. Des.
1050-0472, 124
, pp. 254
–258
.40.
Bonev
, I. A.
, Zlatanov
, D.
, and Gosselin
, C. M.
, 2003, “Singularity Analysis of 3-DOF Planar Parallel Mechanisms Via Screw Theory
,” ASME J. Mech. Des.
1050-0472, 125
, pp. 573
–581
.41.
Liu
, G.
, Lou
, Y.
, and Li
, Z.
, 2003, “Singularities of Parallel Manipulators: A Geometric Treatment
,” IEEE Trans. Rob. Autom.
1042-296X, 19
, pp. 579
–594
.42.
Notash
, L.
, 1998, “Uncertainty Configurations of Parallel Manipulators
,” Mech. Mach. Theory
0094-114X, 33
, pp. 123
–138
.43.
Dasgupata
, B.
, and Mruthyunjaya
, T. S.
, 1998, “Force Redundancy in Parallel Manipulators. Theoretical and Practical Issues
,” Mech. Mach. Theory
0094-114X, 33
, pp. 727
–742
.44.
Li
, Q. C.
, and Huang
, Z.
, 2004, “Mobility Analysis of a Novel 3-5R Parallel Mechanism Family
,” ASME J. Mech. Des.
1050-0472, 126
, pp. 79
–82
.45.
Waldron
, K. J.
, 1966, “The Constraint Analysis of Mechanisms
,” J. Mech.
0022-2569, 1
, pp. 101
–114
.46.
Hunt
, K. H.
, 1967, “Screw Axes and Mobility in Spatial Mechanisms Via the Linear Complex
,” J. Mech.
0022-2569, 2
, pp. 307
–327
.47.
Li
, Q.
, and Huang
, Z.
, 2003, “Mobility Analysis of Lower-Mobility Parallel Manipulators Based on Screw Theory
,” Proceedings of the 2003 IEEE International Conference on Robotics & Automation
, Taipei, September 2003.48.
Dai
, J. S.
, and Rees Jones
, J.
, 1999, “Mobility in Metamorphic Mechanisms of Foldable/Erectable Kinds
,” ASME J. Mech. Des.
1050-0472, 121
, pp. 375
–382
.49.
Dai
, J. S.
, Li
, D.
, Zhang
, Q.
, and Jin
, G. G.
, “Mobility Analysis of a Complex Structured Ball Based on Mechanism Decomposition and Equivalent Screw System Analysis
,” Mech. Mach. Theory
0094-114X, 39
, 2004, pp. 445
–458
.50.
Dimentberg
, F. M.
, 1965, The Screw Calculus and Its Applications in Mechanics
, Izad
, Nauka, Moscow (in Russian). English translated by Foreign Tech Division, WP-APB, Ohio, 1968.51.
Waldron
, K. J.
, 1967, “A Family of Overconstrained Linkages
,” J. Mech.
0022-2569, 2
, pp. 201
–211
.52.
Nayak
, J. H.
, 1979, Ph.D. thesis, Stanford University.53.
Gibson
, C. G.
, and Hunt
, K. H.
, 1990, “Geometry of Screw Systems—2, Classification of Screw Systems
,” Mech. Mach. Theory
0094-114X, 25
, pp. 11
–27
.54.
Rico-Martinez
, J. M.
, and Duffy
, J.
, 1992, “Classification of Screw Systems—I. One- and Two-Systems
,” Mech. Mach. Theory
0094-114X, 27
, pp. 459
–470
.55.
Rico-Martinez
, J. M.
, and Duffy
, J.
, 1992, “Classification of Screw Systems—II. Three-Systems
,” Mech. Mach. Theory
0094-114X, 27
, pp. 471
–490
.56.
Dai
, J. S.
, and Rees Jones
, J.
, 2001, “Interrelationship Between Screw Systems and Corresponding Reciprocal Systems and Applications
,” Mech. Mach. Theory
0094-114X, 36
, pp. 633
–651
.57.
Dai
, J. S.
, and Rees Jones
, J.
, 2002, “Null Space Construction Using Cofactors from a Screw Algebra Context
,” Proc. R. Soc. London, Ser. A
1364-5021, 458
, pp. 1845
–1866
.58.
Davies
, T. H.
, and Primrose
, E. J. F.
, 1971, “An Algebra for the Screw Systems of Pairs of Bodies in a Kinematic Chain
,” Proceedings of the 3rd World Congress for the Theory of Machines and Mechanisms
, Kupari
, Yugoslavia, 13–20 September 1971, Vol. D
, pp. 199
–212
.59.
Davies
, T. H.
, 1981, “Kirchhoff’s Circulation Law Applied to Multi-Loop Kinematic Chains
,” Mech. Mach. Theory
0094-114X, 16
, pp. 171
–183
.60.
Davies
, T. H.
, 1983, “Mechanical Networks-I, II, and III
,” Mech. Mach. Theory
0094-114X, 18
, pp. 95
–101
, 103–106, 107–112.61.
Lipkin
, H.
, and Duffy
, J.
, 1985, “The Elliptic Polarity of Screws
,” ASME J. Mech., Transm., Autom. Des.
0738-0666, 107
, pp. 377
–388
.62.
Salisbury
, J. K.
, and Roth
, B.
, 1982, “Kinematic and Force Analysis of Articulated Mechanical Hands
,” ASME J. Mech., Transm., Autom. Des.
0738-0666, 105
, pp. 33
–41
.63.
Lipkin
, H.
, 1998, Sensor-Based Modification of Local Models for Robotic Manipulation
, NATO ASI Series: CAD Based Programming for Sensory Robots
, edited by B.
Ravani
Springer-Verlag
, New York, pp. 313
–332
.64.
Birkhoff
, G.
, and MacLane
, S. M.
, 1997, A Survey of Modern Algebra, 4th Edition
, Macmillan Publishing Co., Inc.
, New York, Collier Macmillan Publishers, London,65.
Knuth
, D. E.
, 1969, The Art of Computer Programming, Vol. 2, Seminumerical Algorithms
, Addison-Wesley
, New York.66.
Kutzbach
, K.
, 1937, “Quer-und Winkelbewegliche Gleichganggelenke für Wellenleitungen
,” Z. VDI.
, Bd. 81, pp. 889
–892
.67.
Hunt
, K. H.
, 1959, Mechanisms and Motion
, The English Universities Press Ltd
, London.68.
Suh
, C. H.
, and Radcliffe
, C. W.
, 1978, Kinematics and Mechanisms Design
, John Wiley & Sons
, New York.69.
Kerr
, D. R.
, and Sanger
, D. J.
, 1987, “The Synthesis of Point Contact Restraint of a Rigid Body
,” ASME J. Mech., Transm., Autom. Des.
0738-0666, 107
, pp. 521
–525
.70.
Dai
, J. S.
, Holland
, N.
, and Kerr
, D. R.
, 1995, “Finite Twist Mapping and Its Application to Planar Serial Manipulators with Revolute Joints
,” J. Mech. Eng. Sci.
0022-2542, 209
, pp. 263
–272
.71.
Li
, Q. C.
, and Huang
, Z.
, 2003, “Type Synthesis of 4-DOF Parallel Manipulators
,” IEEE ICRA
, pp. 755
–760
.Copyright © 2006
by American Society of Mechanical Engineers
You do not currently have access to this content.
