Skip Nav Destination
Issues
October 2021
ISSN 0094-4289
EISSN 1528-8889
In this Issue
Research Papers
Implementation of a Neural Network into a User-Material Subroutine for Finite Element Simulation of Material Viscoplasticity
J. Eng. Mater. Technol. October 2021, 143(4): 041001.
doi: https://doi.org/10.1115/1.4050704
Effect of ZrO2 Nanoparticles and Mechanical Milling on Microstructure and Mechanical Properties of Al–ZrO2 Nanocomposites
J. Eng. Mater. Technol. October 2021, 143(4): 041002.
doi: https://doi.org/10.1115/1.4050726
Topics:
Aluminum
,
Mechanical properties
,
Milling
,
Nanocomposites
,
Particulate matter
,
Weight (Mass)
,
Density
,
Porosity
,
Nanoparticles
,
Compressive strength
Study on Experiment and Modeling of Viscoelastic Damper Considering Interfacial Effect of Matrix Rubber/Carbon Black
J. Eng. Mater. Technol. October 2021, 143(4): 041003.
doi: https://doi.org/10.1115/1.4050848
Topics:
Chain
,
Dampers
,
Energy dissipation
,
Temperature
,
Displacement
,
Network models
,
Rubber
,
Mechanical properties
,
Modeling
,
Damping
Mechanical Properties of Additively Manufactured Periodic Cellular Structures and Design Variations
J. Eng. Mater. Technol. October 2021, 143(4): 041004.
doi: https://doi.org/10.1115/1.4050939
Topics:
Additive manufacturing
,
Compression
,
Deformation
,
Density
,
Design
,
Diamonds
,
Mechanical properties
,
Stress
,
Displacement
,
Manufacturing
Dynamic Out-of-Plane Compressive Failure Mechanism of Carbon/Carbon Composite: Strain Rate Effect on the Defect Propagation and Microstructure Failure
J. Eng. Mater. Technol. October 2021, 143(4): 041005.
doi: https://doi.org/10.1115/1.4050889
Topics:
Carbon
,
Composite materials
,
Compression
,
Constitutive equations
,
Failure
,
Failure mechanisms
,
Stress
,
Mechanical behavior
,
Damage
,
Fracture (Materials)
Design Equations for Mixed-Mode Fracture of Dental Ceramic–Cement Interfaces Using the Brazil-Nut-Sandwich Test
J. Eng. Mater. Technol. October 2021, 143(4): 041006.
doi: https://doi.org/10.1115/1.4050972
Topics:
Cements (Adhesives)
,
Ceramics
,
Fracture (Materials)
,
Stress
,
Design
,
Finite element analysis
,
Disks
,
Fracture toughness
,
Fracture (Process)
Quasi-Static and Dynamic Behavior of Inconel 625 Obtained by Laser Metal Deposition: Experimental Characterization and Constitutive Modeling
J. Eng. Mater. Technol. October 2021, 143(4): 041007.
doi: https://doi.org/10.1115/1.4051087
Microstructural Design of Graphene Nanocomposites for Improved Electrical Conductivity
J. Eng. Mater. Technol. October 2021, 143(4): 041008.
doi: https://doi.org/10.1115/1.4051307
Effect of Zirconium Oxide Reinforcement on Microstructural, Electrochemical, and Mechanical Properties of TiNi Alloy Produced via Powder Metallurgy Route
S. Abbas Raza, M. Imran Khan, M. Ramzan Abdul Karim, Rashid Ali, M. Umair Naseer, S. Zameer Abbas, Mairaj Ahmad
J. Eng. Mater. Technol. October 2021, 143(4): 041009.
doi: https://doi.org/10.1115/1.4051308
Experimental and Molecular Dynamics Simulation-Based Investigations on Hydrogen Embrittlement Behavior of Chromium Electroplated 4340 Steel
J. Eng. Mater. Technol. October 2021, 143(4): 041010.
doi: https://doi.org/10.1115/1.4051400
Modeling the Creep of Nickel
J. Eng. Mater. Technol. October 2021, 143(4): 041011.
doi: https://doi.org/10.1115/1.4051421
Topics:
Creep
,
Nickel
,
Stress
,
Temperature
Technical Brief
A Novel Test Design for Large Strain Uniaxial Reverse Loading of AZ31B Sheet Out of the Rolling Plane
J. Eng. Mater. Technol. October 2021, 143(4): 044501.
doi: https://doi.org/10.1115/1.4050727
Topics:
Compression
,
Design
,
Magnesium alloys
,
Shot peening
,
Simulation
,
Stress
,
Tension
,
Buckling
,
Finite element analysis
,
Manufacturing
Email alerts
RSS Feeds
Modeling Growth and Viscous Flow of Oxide on Cylindrical Silicon Surfaces Including Piezoviscous Inhibition
J. Eng. Mater. Technol (April 2025)
Thermal Conductivity of 3D-Printed Metal Using Extrusion-Based Metal Additive Manufacturing Process
J. Eng. Mater. Technol (April 2025)