Volume 139 Issue 11 | J. Manuf. Sci. Eng.

Topics: Dimensions , Electrical discharge machining , Energy levels (Quantum mechanics) , Simulation , Surface roughness , Surface texture , Texture (Materials) , Plasmas (Ionized gases) , Heat flux , Modeling

Experimental Study and Finite Element Modeling of Workpiece Temperature in Finish Cylinder Boring

Lei Chen, Bruce L. Tai, Juhchin A. Yang, Albert J. Shih

J. Manuf. Sci. Eng. November 2017, 139(11): 111003. doi: https://doi.org/10.1115/1.4037554

Abstract

View articletitled, Experimental Study and Finite Element Modeling of Workpiece Temperature in Finish Cylinder Boring

Open the PDF for in another window

Topics: Finishes , Finite element methods , Finite element model , Heat , Temperature , Thermocouples , Cutting , Heat transfer , Cylinders

Additive Manufacturing With Conductive, Viscoelastic Polymer Composites: Direct-Ink-Writing of Electrolytic and Anodic Poly(Ethylene Oxide) Composites

Sepehr Nesaei, Mitch Rock, Yu Wang, Michael R. Kessler, Arda Gozen

J. Manuf. Sci. Eng. November 2017, 139(11): 111004. doi: https://doi.org/10.1115/1.4037238

Abstract

View articletitled, Additive Manufacturing With Conductive, Viscoelastic Polymer Composites: Direct-Ink-Writing of Electrolytic and Anodic Poly(Ethylene Oxide) Composites

Open the PDF for in another window

Topics: Inks , Printing , Flow (Dynamics)

A Novel Incremental Sheet Bending Process of Complex Curved Steel Plate

Qiyang Zuo, Kai He, Xiaobing Dang, Wei Feng, Ruxu Du

J. Manuf. Sci. Eng. November 2017, 139(11): 111005. doi: https://doi.org/10.1115/1.4037428

Abstract

View articletitled, A Novel Incremental Sheet Bending Process of Complex Curved Steel Plate

Open the PDF for in another window

Topics: Blanks , Columns (Structural) , Computer numerical control machine tools , Engineering prototypes , Machinery , Path planning , Pressing , Shapes , Steel , Hull

GDFE: Geometry-Driven Finite Element for Four-Dimensional Printing

Tsz-Ho Kwok, Yong Chen

J. Manuf. Sci. Eng. November 2017, 139(11): 111006. doi: https://doi.org/10.1115/1.4037429

Abstract

View articletitled, GDFE: Geometry-Driven Finite Element for Four-Dimensional Printing

Open the PDF for in another window

Topics: Deformation , Design , Finite element analysis , Geometry , Manufacturing , Printing , Shapes , Simulation , Modeling

Fabrication of Inner Grooved Hollow Fiber Membranes Using Microstructured Spinneret for Nerve Regeneration

Jun Yin, Zonghuan Wang, Wenxuan Chai, Guangli Dai, Hairui Suo, Ning Zhang, Xuejun Wen, Yong Huang

J. Manuf. Sci. Eng. November 2017, 139(11): 111007. doi: https://doi.org/10.1115/1.4037430

Abstract

View articletitled, Fabrication of Inner Grooved Hollow Fiber Membranes Using Microstructured Spinneret for Nerve Regeneration

Open the PDF for in another window

Topics: Fibers , Flow (Dynamics) , Fluid dynamics , Geometry , Manufacturing , Membranes , Dimensions , Spin (Aerodynamics) , Spinning (Textile) , Fluids

A Dynamical Model of Drop Spreading in Electrohydrodynamic Jet Printing

Christopher P. Pannier, Mamadou Diagne, Isaac A. Spiegel, David J. Hoelzle, Kira Barton

J. Manuf. Sci. Eng. November 2017, 139(11): 111008. doi: https://doi.org/10.1115/1.4037436

Abstract

View articletitled, A Dynamical Model of Drop Spreading in Electrohydrodynamic Jet Printing

Open the PDF for in another window

Topics: Electrohydrodynamics , Printing , Simulation , Dynamics (Mechanics)

Investigation on the Effects of Process Parameters on Defect Formation in Friction Stir Welded Samples Via Predictive Numerical Modeling and Experiments

Abhishek Ajri, Yung C. Shin

J. Manuf. Sci. Eng. November 2017, 139(11): 111009. doi: https://doi.org/10.1115/1.4037240

Abstract

View articletitled, Investigation on the Effects of Process Parameters on Defect Formation in Friction Stir Welded Samples Via Predictive Numerical Modeling and Experiments

Open the PDF for in another window

Topics: Cavities , Finite element model , Flow (Dynamics) , Friction , Temperature , Tunnels , Welding , Temperature distribution , Computer simulation

Effect of Different Heat Treatments on Mechanical Properties of Laser Sintered Additive Manufactured Parts

Sagar Sarkar, Cheruvu Siva Kumar, Ashish Kumar Nath

J. Manuf. Sci. Eng. November 2017, 139(11): 111010. doi: https://doi.org/10.1115/1.4037437

Abstract

View articletitled, Effect of Different Heat Treatments on Mechanical Properties of Laser Sintered Additive Manufactured Parts

Open the PDF for in another window

Topics: Additive manufacturing , Heat , Heat treating (Metalworking) , Lasers , Mechanical properties , Metals , Precipitation hardening , Sintering , Stainless steel , Tensile strength

Multi-Objective Build Orientation Optimization for Powder Bed Fusion by Laser

Salah Eddine Brika, Yaoyao Fiona Zhao, Mathieu Brochu, Justin Mezzetta

J. Manuf. Sci. Eng. November 2017, 139(11): 111011. doi: https://doi.org/10.1115/1.4037570

Abstract

View articletitled, Multi-Objective Build Orientation Optimization for Powder Bed Fusion by Laser

Open the PDF for in another window

Topics: Lasers , Mechanical properties , Optimization , Stress , Surface roughness , Machinery , Pareto optimization , Graphical user interfaces , Heat

In Situ Observations and Pressure Measurements for Autoclave Co-Cure of Honeycomb Core Sandwich Structures

Mark Anders, Daniel Zebrine, Timotei Centea, Steven Nutt

J. Manuf. Sci. Eng. November 2017, 139(11): 111012. doi: https://doi.org/10.1115/1.4037432

Abstract

View articletitled, In Situ Observations and Pressure Measurements for Autoclave Co-Cure of Honeycomb Core Sandwich Structures

Open the PDF for in another window

Topics: Evacuations , Honeycomb structures , Permeability , Pressure , Temperature , Vacuum , Sandwich structures , Skin , Laminates , Resins

Simplification of a G-Code Feeding Path in Roughing Multi-Axis Electrical Discharging Machining for Shrouded Blisks With a Contour Error Constraint

Xue-Cheng Xi, Hao Chen, Wan-Sheng Zhao

J. Manuf. Sci. Eng. November 2017, 139(11): 111013. doi: https://doi.org/10.1115/1.4037569

Abstract

View articletitled, Simplification of a G-Code Feeding Path in Roughing Multi-Axis Electrical Discharging Machining for Shrouded Blisks With a Contour Error Constraint

Open the PDF for in another window

Topics: Electrical discharge machining , Electrodes , Errors , Grinding , Machining , Machinery , Kinematics

Solid-State Infiltration of 6061-T6 Aluminum Alloy Into Carbon Fibers Via Friction Stir Welding

Daniel J. Franke, Justin D. Morrow, Michael R. Zinn, Frank E. Pfefferkorn

J. Manuf. Sci. Eng. November 2017, 139(11): 111014. doi: https://doi.org/10.1115/1.4037421

Abstract

View articletitled, Solid-State Infiltration of 6061-T6 Aluminum Alloy Into Carbon Fibers Via Friction Stir Welding

Open the PDF for in another window

Topics: Aluminum , Carbon fibers , Fibers , Friction , Welding , Joining , Flow (Dynamics) , Viscosity , Pressure , Polymers

Tool Path Generation for Turbine Blades Machining With Twin Tool

Dun Lu, Jun Liu, Wanhua Zhao, Bingheng Lu, Diaodiao Wu, Dongdong Song, Fei Xue, Bing Cheng

J. Manuf. Sci. Eng. November 2017, 139(11): 111015. doi: https://doi.org/10.1115/1.4037423

Abstract

View articletitled, Tool Path Generation for Turbine Blades Machining With Twin Tool

Open the PDF for in another window

Topics: Blades , Cutting , Machining , Machine tools , Kinematics

Modeling and Simulation of a Selective Laser Foaming Process for Fabrication of Microliter Tissue Engineering Scaffolds

JinGyu Ock, Wei Li

J. Manuf. Sci. Eng. November 2017, 139(11): 111016. doi: https://doi.org/10.1115/1.4037425

Abstract

View articletitled, Modeling and Simulation of a Selective Laser Foaming Process for Fabrication of Microliter Tissue Engineering Scaffolds

Open the PDF for in another window

Topics: Lasers , Ablation (Vaporization technology) , Modeling

Thermomechanical Analysis of an Electrically Assisted Wire Drawing Process

Antonio J. Sánchez Egea, Hernán A. González Rojas, Diego J. Celentano, Jordi Jorba Perió, Jian Cao

J. Manuf. Sci. Eng. November 2017, 139(11): 111017. doi: https://doi.org/10.1115/1.4037798

Abstract

View articletitled, Thermomechanical Analysis of an Electrically Assisted Wire Drawing Process

Open the PDF for in another window

Topics: Hardening , Stress , Temperature , Thermomechanics , Wire , Wire drawing , Manufacturing , Computer simulation , Deformation , Expandable polystyrene

Predicting Sheet Forming Limit of Aluminum Alloys for Cold and Warm Forming by Developing a Ductile Failure Criterion

Z. Q. Sheng, P. K. Mallick

J. Manuf. Sci. Eng. November 2017, 139(11): 111018. doi: https://doi.org/10.1115/1.4037609

Abstract

View articletitled, Predicting Sheet Forming Limit of Aluminum Alloys for Cold and Warm Forming by Developing a Ductile Failure Criterion

Open the PDF for in another window

Topics: Failure , Forming limit diagrams , Sheet materials , Temperature , Aluminum alloys , Tension , Damage

Technical Brief

A Computational Study of Mixed Convection Heat Transfer From a Continuously Moving Isothermal Vertical Plate to Alumina–Water Nanofluid as in Hot Extrusion

Arijit Mahapatra, P. S. Ghoshdastidar

J. Manuf. Sci. Eng. November 2017, 139(11): 114501. doi: https://doi.org/10.1115/1.4037422

Abstract

View articletitled, A Computational Study of Mixed Convection Heat Transfer From a Continuously Moving Isothermal Vertical Plate to Alumina–Water Nanofluid as in Hot Extrusion

Open the PDF for in another window

Topics: Fluids , Heat transfer , Heat transfer coefficients , Mixed convection , Nanofluids , Nanoparticles , Temperature , Water , Extruding , Vertical plates

Review Article

A Review of Electrically-Assisted Manufacturing With Emphasis on Modeling and Understanding of the Electroplastic Effect

Research Papers

Performance Prediction for Ultrasonic Spot Welds of Short Carbon Fiber-Reinforced Composites Under Shear Loading

Analytical Simulation of Random Textures Generated in Electrical Discharge Texturing

Experimental Study and Finite Element Modeling of Workpiece Temperature in Finish Cylinder Boring

Additive Manufacturing With Conductive, Viscoelastic Polymer Composites: Direct-Ink-Writing of Electrolytic and Anodic Poly(Ethylene Oxide) Composites

A Novel Incremental Sheet Bending Process of Complex Curved Steel Plate

GDFE: Geometry-Driven Finite Element for Four-Dimensional Printing

Fabrication of Inner Grooved Hollow Fiber Membranes Using Microstructured Spinneret for Nerve Regeneration

A Dynamical Model of Drop Spreading in Electrohydrodynamic Jet Printing

Investigation on the Effects of Process Parameters on Defect Formation in Friction Stir Welded Samples Via Predictive Numerical Modeling and Experiments

Effect of Different Heat Treatments on Mechanical Properties of Laser Sintered Additive Manufactured Parts

Multi-Objective Build Orientation Optimization for Powder Bed Fusion by Laser

In Situ Observations and Pressure Measurements for Autoclave Co-Cure of Honeycomb Core Sandwich Structures

Simplification of a G-Code Feeding Path in Roughing Multi-Axis Electrical Discharging Machining for Shrouded Blisks With a Contour Error Constraint

Solid-State Infiltration of 6061-T6 Aluminum Alloy Into Carbon Fibers Via Friction Stir Welding

Tool Path Generation for Turbine Blades Machining With Twin Tool

Modeling and Simulation of a Selective Laser Foaming Process for Fabrication of Microliter Tissue Engineering Scaffolds

Thermomechanical Analysis of an Electrically Assisted Wire Drawing Process

Predicting Sheet Forming Limit of Aluminum Alloys for Cold and Warm Forming by Developing a Ductile Failure Criterion

Technical Brief

A Computational Study of Mixed Convection Heat Transfer From a Continuously Moving Isothermal Vertical Plate to Alumina–Water Nanofluid as in Hot Extrusion

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

Issues

Review Article

Research Papers

Technical Brief

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only