Laser welding of wrought magnesium alloy has been investigated through experimentation and simulation. Laser butt welds and laser lap welds were performed on 2.0 mm thick magnesium alloy AZ31 plates using a 1 kW fiber laser and shielded with argon gas. The effects of laser power and welding speed on weld geometry and microstructure were investigated. Tensile tests were performed to verify weld quality. Through experimentation, a novel processing map was created, which gives the ranges of operating parameters of laser power and welding speed that resulted in viable, defect-free welds. Numerical simulations were performed to predict the weld pool geometry and keyhole stability, and resultant microstructures are shown to be in good agreement with experimental results.
Issue Section:
Research Papers
References
1.
Kulekci
, M. K.
, 2008
, “Magnesium and Its Alloys Applications in Automotive Industry
,” Int. J. Adv. Manuf. Technol.
, 39
(9–10
), pp. 851
–865
.10.1007/s00170-007-1279-22.
Munitz
, A.
, Cotler
, C.
, Stern
, A.
, and Kohn
, G.
, 2001
, “Mechanical Properties and Microstructure of Gas Tungsten Arc Welded Magnesium AZ91D Plates
,” Mater. Sci. Eng.: A
, 302
(1
), pp. 68
–73
.10.1016/S0921-5093(00)01356-33.
Cao
, X.
, Jahazi
, M.
, Immarigeon
, J. P.
, and Wallace
, W.
, 2006
, “A Review of Laser Welding Techniques for Magnesium Alloys
,” J. Mater. Process. Technol.
, 171
(2
), pp. 188
–204
.10.1016/j.jmatprotec.2005.06.0684.
Coelho
, R. S.
, Kostka
, A.
, Pinto
, H.
, Riekehr
, S.
, Kocak
, M.
, and Pyzalla
, A. R.
, 2008
, “Microstructure and Mechanical Properties of Magnesium Alloy AZ31B Laser Beam Welds
,” Mater. Sci. Eng.: A
, 485
(1
), pp. 20
–30
.10.1016/j.msea.2007.07.0735.
Kim
, J.-D.
, Lee
, J.-H.
, and Kim
, J.-S.
, 2010
, “Characteristics of Butt-Welded Joints on AZ31 Magnesium Alloy Using a Nd: YAG Laser
,” Int. J. Precis. Eng. Manuf.
, 11
(3
), pp. 369
–373
.10.1007/s12541-010-0042-z6.
Wang
, Z.
, Gao
, M.
, Tang
, H.
, and Zeng
, X.
, 2011
, “Characterization of AZ31B Wrought Magnesium Alloy Joints Welded by High Power Fiber Laser
,” Mater. Charact.
, 62
(10
), pp. 943
–951
.10.1016/j.matchar.2011.07.0027.
Scintilla
, L. D.
, Tricarico
, L.
, Brandizzi
, M.
, and Satriano
, A. A.
, 2010
, “Nd: YAG Laser Weldability and Mechanical Properties of AZ31 Magnesium Alloy Butt Joints
,” J. Mater. Process. Technol.
, 210
(15
), pp. 2206
–2214
.10.1016/j.jmatprotec.2010.08.0058.
Chowdhury
, S. M.
, Chen
, D. L.
, Bhole
, S. D.
, Powidajko
, E.
, Weckman
, D. C.
, and Zhou
, Y.
, 2011
, “Microstructure and Mechanical Properties of Fiber-Laser-Welded and Diode-Laser-Welded AZ31 Magnesium Alloy
,” Metall. Mater. Trans. A
, 42
(7
), pp. 1974
–1989
.10.1007/s11661-010-0574-y9.
Scintilla
, L. D.
, and Tricarico
, L.
, 2013
, “Optimization of AZ31 Magnesium Alloy Laser Beam Welding Parameters Based on Process Efficiency Calculation by Finite Element Method and Joint Mechanical Properties
,” Opt. Eng.
, 52
(10
), p. 105101
.10.1117/1.OE.52.10.10510110.
Ki
, H.
, Mazumder
, J.
, and Mohanty
, P. S.
, 2002
, “Modeling of Laser Keyhole Welding: Part I. Mathematical Modeling, Numerical Methodology, Role of Recoil Pressure, Multiple Reflections, and Free Surface Evolution
,” Metall. Mater. Trans. A
, 33
(6
), pp. 1817
–1830
.10.1007/s11661-002-0190-611.
Pang
, S.
, Chen
, L.
, Zhou
, J.
, Yin
, Y.
, and Chen
, T.
, 2011
, “A Three-Dimensional Sharp Interface Model for Self-Consistent Keyhole and Weld Pool Dynamics in Deep Penetration Laser Welding
,” J. Phys. D: Appl. Phys.
, 44
(2
), p. 025301
.10.1088/0022-3727/44/2/02530112.
Zhou
, J.
, Tsai
, H.-L.
, and Wang
, P.-C.
, 2006
, “Transport Phenomena and Keyhole Dynamics During Pulsed Laser Welding
,” ASME J. Heat Transfer
, 128
(7
), pp. 680
–690
.10.1115/1.219404313.
Marimuthu
, S.
, Eghlio
, R. M.
, Pinkerton
, A. J.
, and Li
, L.
, 2013
, “Coupled Computational Fluid Dynamic and Finite Element Multiphase Modeling of Laser Weld Bead Geometry Formation and Joint Strengths
,” ASME J. Manuf. Sci. Eng.
, 135
(1
), p. 011004
.10.1115/1.402324014.
Tan
, W.
, Bailey
, N. S.
, and Shin
, Y. C.
, 2013
, “Investigation of Keyhole Plume and Molten Pool Based on a Three-Dimensional Dynamic Model With Sharp Interface Formulation
,” J. Phys. D: Appl. Phys.
, 46
(5
), p. 055501
.10.1088/0022-3727/46/5/05550115.
Kou
, S.
, 1987
, Welding Metallurgy
, John Wiley
, NY
.16.
Chowdhury
, S. H.
, Chen
, D. L.
, Bhole
, S. D.
, Powidajko
, E.
, Weckman
, D. C.
, and Zhou
, Y.
, 2012
, “Fiber Laser Welded AZ31 Magnesium Alloy: The Effect of Welding Speed on Microstructure and Mechanical Properties
,” Metall. Mater. Trans. A
, 43
(6
), pp. 2133
–2147
.10.1007/s11661-011-1042-z17.
Funk
, E. R.
, and Rieber
, L. J.
, 1985
, Handbook of Welding
, Breton Publishers
, Albany, NY
.18.
Tan
, W.
, and Shin
, Y. C.
, 2014
, “Analysis of Multi-Phase Interaction and Its Effects on Keyhole Dynamics With a Multi-Physics Numerical Model
,” J. Phys. D: Appl. Phys.
, 47
(34
), p. 345501
.10.1088/0022-3727/47/34/34550119.
Lee
, S.
, Ham
, H. J.
, Kwon
, S. Y.
, Kim
, S. W.
, and Suh
, C. M.
, 2013
, “Thermal Conductivity of Magnesium Alloys in the Temperature Range from −125 °C to 400 °C
,” Int. J. Thermophys.
, 34
(12), pp. 2343
–2350
.10.1007/s10765-011-1145-120.
Abderrazak
, K.
, Bannour
, S.
, Mhiri
, H.
, Lepalec
, G.
, and Autric
, M.
, 2009
, “Numerical and Experimental Study of Molten Pool Formation During Continuous Laser Welding of AZ91 Magnesium Alloy
,” Comput. Mater. Sci.
, 44
(3
), pp. 858
–866
.10.1016/j.commatsci.2008.06.00221.
He
, Y.
, Javaid
, A.
, Essadiqi
, E.
, and Shehata
, M.
, 2009
, “Numerical Simulation and Experimental Study of the Solidification of a Wedge-Shaped AZ31 Mg Alloy Casting
,” Can. Metall. Q.
, 48
(2
), pp. 145
–155
.10.1179/cmq.2009.48.2.145Copyright © 2015 by ASME
You do not currently have access to this content.
