The operation of corner-radiused tools under both depth-of-cut and feed variation is a situation that occurs for many processes (e.g., straight turning, contour turning, boring, and face-milling) and under many practical conditions. A new chip-area expression is formulated by applying a rotational transformation to the chip-area geometry. Results obtained with this new representation are compared to an exact area computation algorithm based on geometric shapes. The new representation and its associated expressions are far more simple than those of the exact area representation. The errors introduced by the new representation have been analyzed and found to be very small. To increase the accuracy of the expressions for numerical applications, numerical and analytical error-compensation functions have been developed. The latter makes the expressions exact, at the expense of increased algorithmic content, whereas the former is less algorithmic with negligible errors even under extreme conditions. [S1087-1357(00)00404-4]
Skip Nav Destination
Article navigation
November 2000
Technical Papers
An Analytical Representation of Chip Area for Corner-Radiused Tools Under Both Depth-of-Cut and Feed Variations
O. Burak Ozdoganlar, Graduate Student Research Assistant,
O. Burak Ozdoganlar, Graduate Student Research Assistant
Department of Mechanical Engineering and Applied Mechanics, University of Michigan, Ann Arbor, MI 48109-2125
Search for other works by this author on:
William J. Endres, Assistant Professor, Mem. ASME
William J. Endres, Assistant Professor, Mem. ASME
Department of Mechanical Engineering and Applied Mechanics, University of Michigan, Ann Arbor, MI 48109-2125
Search for other works by this author on:
O. Burak Ozdoganlar, Graduate Student Research Assistant
Department of Mechanical Engineering and Applied Mechanics, University of Michigan, Ann Arbor, MI 48109-2125
William J. Endres, Assistant Professor, Mem. ASME
Department of Mechanical Engineering and Applied Mechanics, University of Michigan, Ann Arbor, MI 48109-2125
Contributed by the Manufacturing Engineering Division for publication in the JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING. Manuscript received Dec. 1997; revised Dec. 1999. Associate Technical Editor: K. Ehmann.
J. Manuf. Sci. Eng. Nov 2000, 122(4): 660-665 (6 pages)
Published Online: December 1, 1999
Article history
Received:
December 1, 1997
Revised:
December 1, 1999
Citation
Ozdoganlar, O. B., and Endres, W. J. (December 1, 1999). "An Analytical Representation of Chip Area for Corner-Radiused Tools Under Both Depth-of-Cut and Feed Variations ." ASME. J. Manuf. Sci. Eng. November 2000; 122(4): 660–665. https://doi.org/10.1115/1.1286470
Download citation file:
Get Email Alerts
Cited By
Related Articles
Robust Feedrate Selection for 3-Axis NC Machining Using Discrete Models
J. Manuf. Sci. Eng (May,2001)
Parameter Space Decomposition for Selection of the Axial and Radial Depth of Cut in Endmilling
J. Manuf. Sci. Eng (November,2001)
Accurate 5-Axis Machining of Twisted Ruled Surfaces
J. Manuf. Sci. Eng (November,2001)
A New Model and Analysis of Orthogonal Machining With an Edge-Radiused Tool
J. Manuf. Sci. Eng (August,2000)
Related Proceedings Papers
Related Chapters
Cutting and Machining
Fabrication of Metallic Pressure Vessels
Modeling of Cutting Force in Vibration-Assisted Machining
Vibration Assisted Machining: Theory, Modelling and Applications
A Method for Matching Two-Dimensional Contours
International Conference on Mechanical and Electrical Technology, 3rd, (ICMET-China 2011), Volumes 1–3