I would like to thank M. M. Awad for the time he spent and appreciate his consideration in reading and carefully reviewing the paper, Sahin, A. Z., 1998, “Second Law Analysis of Laminar Viscous Flow Through a Duct Subjected to Constant Wall Temperature” ASME J. Heat Transfer, 120(1), pp. 76–83.

Obviously, the term (1e4Stλ) in Eq. (10) was supposed to be (1e4Stλ)1. Unfortunately, this error was propagated in the rest of the paper in Eqs. (14), (17), (20), (22) and in p. 81. Perhaps this is the only major concern about the paper.

As for the range of τ in Table 1, the choice was 0.0τ0.2 and it is not an error. The reason for this choice is to make sure that all the temperatures in the flow domain remain within the range of temperatures 293KT373K, within which the viscosity model parameters a, b, B, and n given in Table 1 are valid (especially for the case of glycerol).

The values of T0 in Tables 2b and 3b are in K; however, (°C) in the labels are typing errors.

In the paper, Sahin, A. Z., 1998, “A Second Law Comparison for Optimum Shape of Duct Subjected to Constant Wall Temperature and Laminar Flow,” Heat and Mass Transfer /Wärme-und Stoffübertragung, 33(5-6), pp. 425–430, the fluid was assumed to be fully developed laminar as it enters the duct in all types of geometry. Therefore, the comments made regarding the thermal entry length are not relevant.