An energy-based fatigue lifing procedure for the determination of full-life and critical-life of in-service structures subjected to axial isothermal-mechanical fatigue (IMF) has been developed. The foundation of this procedure is the energy-based axial room-temperature fatigue model, which states: the total strain energy density accumulated during both a monotonic fracture event and a fatigue process is the same material property. The energy-based axial IMF lifing framework is composed of the following entities: (1) the development of an axial IMF testing capability; (2) the creation of a testing procedure capable of assessing the strain energy accrued during both a monotonic fracture process and a fatigue process at various elevated temperatures; and (3), the incorporation of the effect of temperature into the axial fatigue lifing model. Both an axial IMF capability and a detailed testing procedure were created. The axial IMF capability was employed in conjunction with the monotonic fracture curve testing procedure to produce fifteen fracture curves at four operating temperatures. The strain energy densities for these fracture curves were compared, leading to the assumption of constant monotonic fracture energy at operating temperatures below the creep activation temperature.
Skip Nav Destination
e-mail: shen.1@osu.edu
Article navigation
February 2012
Technical Briefs
An Energy-Based Axial Isothermal- Mechanical Fatigue Lifing Procedure
M.-H. Herman Shen,
M.-H. Herman Shen
Department of Mechanical and Aerospace Engineering,
e-mail: shen.1@osu.edu
The Ohio State University
, Columbus, OH 43210
Search for other works by this author on:
Charles Cross
Charles Cross
Air Force Research Laboratory
, Wright-Patterson AFB, OH 45433
Search for other works by this author on:
M.-H. Herman Shen
Department of Mechanical and Aerospace Engineering,
The Ohio State University
, Columbus, OH 43210e-mail: shen.1@osu.edu
Charles Cross
Air Force Research Laboratory
, Wright-Patterson AFB, OH 45433J. Eng. Gas Turbines Power. Feb 2012, 134(2): 024502 (5 pages)
Published Online: December 14, 2011
Article history
Received:
April 11, 2011
Revised:
May 22, 2011
Online:
December 14, 2011
Published:
December 14, 2011
Citation
Wertz, J., Herman Shen, M., Scott-Emuakpor, O., George, T., and Cross, C. (December 14, 2011). "An Energy-Based Axial Isothermal- Mechanical Fatigue Lifing Procedure." ASME. J. Eng. Gas Turbines Power. February 2012; 134(2): 024502. https://doi.org/10.1115/1.4004394
Download citation file:
Get Email Alerts
Cited By
Study Of Tandem Rotor Dual Wake Interaction With Downstream Stator Under Unsteady Numerical Approach
J. Eng. Gas Turbines Power
An Efficient Uncertainty Quantification Method Based on Inter-Blade Decoupling for Compressors
J. Eng. Gas Turbines Power (April 2025)
Experimental Design Validation of a Swirl-Stabilized Burner With Fluidically Variable Swirl Number
J. Eng. Gas Turbines Power (April 2025)
Experimental Characterization of a Bladeless Air Compressor
J. Eng. Gas Turbines Power (April 2025)
Related Articles
Elevated Temperature Shakedown Concepts
J. Pressure Vessel Technol (October,2011)
A State-of-the-Art Review of Fatigue Life Prediction Models for Solder Joint
J. Electron. Packag (December,2019)
Failure Mechanisms of High Temperature Components in Power Plants
J. Eng. Mater. Technol (July,2000)
Related Proceedings Papers
Related Chapters
Division 5—High Temperature Reactors
Companion Guide to the ASME Boiler and Pressure Vessel Codes, Volume 1, Fifth Edition
Division 5—High Temperature Reactors
Online Companion Guide to the ASME Boiler & Pressure Vessel Codes
Advanced PWR Cladding Development through Extensive In-Reactor Testing
Zirconium in the Nuclear Industry: 20th International Symposium