This paper describes recent developments of the thermal barrier sensor concept for nondestructive evaluation (NDE) of thermal barrier coatings (TBCs) and online condition monitoring in gas turbines. Increases in turbine inlet temperature in the pursuit of higher efficiency will make it necessary to improve or upgrade current thermal protection systems in gas turbines. As these become critical to safe operation, it will also be necessary to devise techniques for online condition monitoring and NDE. The authors have proposed thermal barrier sensor coatings (TBSCs) as a possible means of achieving NDE for TBCs. TBSCs are made by doping the ceramic material (currently yttria-stabilized zirconia (YSZ)) with a rare-earth activator to provide the coating with luminescence when excited with UV light. This paper describes the physics of the thermoluminescent response of such coatings and shows how this can be used to measure temperature. Calibration data are presented along with the results of comparative thermal cycle testing of TBSCs, produced using a production standard air plasma spray system. The latter show the durability of TBSCs to be similar to that of standard YSZ TBCs and indicate that the addition of the rare-earth dopant is not detrimental to the coating. Also discussed is the manufacture of functionally structured coatings with discreet doped layers. The temperature at the bond coat interface is important with respect to the life of the coating since it influences the growth rate of the thermally grown oxide layer, which in turn destabilizes the coating system as it becomes thicker. Experimental data are presented, indicating that dual-layered TBSCs can be used to detect luminescence from, and thereby the temperature within, subsurface layers covered by as much as of standard TBC material. A theoretical analysis of the data has allowed some preliminary calculations of the transmission properties of the overcoat to be made, and these suggest that it might be possible to observe phosphorescence and measure temperature through an overcoat layer of up to approximately 1.56 mm thickness.
Skip Nav Destination
Article navigation
November 2008
Research Papers
Optical Nondestructive Condition Monitoring of Thermal Barrier Coatings
A. L. Heyes,
A. L. Heyes
Department of Mechanical Engineering,
Imperial College London
, Exhibition Road, London, SW7 2AZ, UK
Search for other works by this author on:
J. P. Feist,
J. P. Feist
Southside Thermal Sciences Ltd.
, c/o IC Innovations, Imperial College London, Exhibition Road, London, SW7 2AZ, UK
Search for other works by this author on:
X. Chen,
X. Chen
Solar Turbines Inc.
, 2200 Pacific Highway, P.O. Box 85376, San Diego, CA 92186-5376
Search for other works by this author on:
Z. Mutasim,
Z. Mutasim
Solar Turbines Inc.
, 2200 Pacific Highway, P.O. Box 85376, San Diego, CA 92186-5376
Search for other works by this author on:
J. R. Nicholls
J. R. Nicholls
Cranfield University
, College Road, Cranfield, Bedfordshire, MK43 0AL, UK
Search for other works by this author on:
A. L. Heyes
Department of Mechanical Engineering,
Imperial College London
, Exhibition Road, London, SW7 2AZ, UK
J. P. Feist
Southside Thermal Sciences Ltd.
, c/o IC Innovations, Imperial College London, Exhibition Road, London, SW7 2AZ, UK
X. Chen
Solar Turbines Inc.
, 2200 Pacific Highway, P.O. Box 85376, San Diego, CA 92186-5376
Z. Mutasim
Solar Turbines Inc.
, 2200 Pacific Highway, P.O. Box 85376, San Diego, CA 92186-5376
J. R. Nicholls
Cranfield University
, College Road, Cranfield, Bedfordshire, MK43 0AL, UKJ. Eng. Gas Turbines Power. Nov 2008, 130(6): 061301 (8 pages)
Published Online: August 28, 2008
Article history
Received:
April 27, 2007
Revised:
September 4, 2007
Published:
August 28, 2008
Citation
Heyes, A. L., Feist, J. P., Chen, X., Mutasim, Z., and Nicholls, J. R. (August 28, 2008). "Optical Nondestructive Condition Monitoring of Thermal Barrier Coatings." ASME. J. Eng. Gas Turbines Power. November 2008; 130(6): 061301. https://doi.org/10.1115/1.2940988
Download citation file:
Get Email Alerts
Cited By
Image-based flashback detection in a hydrogen-fired gas turbine using a convolutional autoencoder
J. Eng. Gas Turbines Power
Fuel Thermal Management and Injector Part Design for LPBF Manufacturing
J. Eng. Gas Turbines Power
An investigation of a multi-injector, premix/micromix burner burning pure methane to pure hydrogen
J. Eng. Gas Turbines Power
Related Articles
Assessment of the Spent Life Fraction of Gas Turbine Blades by Coating Life Modeling and Photostimulated Luminescence Piezospectroscopy
J. Eng. Gas Turbines Power (November,2010)
Sensor Thermal Barrier Coatings: Remote In Situ Condition Monitoring of EB-PVD Coatings at Elevated Temperatures
J. Eng. Gas Turbines Power (July,2009)
Role of Platinum in Thermal Barrier Coatings Used in Gas Turbine Blade Applications
J. Eng. Gas Turbines Power (February,2010)
Effects of Alloy Composition on the Performance of Yttria Stabilized Zirconia—Thermal Barrier Coatings
J. Eng. Gas Turbines Power (July,2000)
Related Chapters
Tool Condition Monitoring in Metal Cutting Processes - a Systematic Approach Using ANN Based Multiple Sensor Fusion Strategy
Intelligent Engineering Systems through Artificial Neural Networks, Volume 20
Nondestructive Examination (NDE)
Companion Guide to the ASME Boiler and Pressure Vessel Codes, Volume 1, Fifth Edition
Nondestructive Examination (NDE)
Online Companion Guide to the ASME Boiler & Pressure Vessel Codes