The role of cylinder bore shapes in engine performance has been the subject of several studies in recent years. In particular, the influence of bore distortion on oil consumption under high speed conditions has generated significant interest. In this paper, the effect of an axial bore profile on radial dynamics of a ring is investigated. Radial ring motions within grooves due to the axial bore profile can generate significant inertial effects and also have an impact on ring end-gap sizes and lubrication conditions at the ring-liner interfaces. The magnitude of such effects is dependent on the ring-pack configuration, engine operating conditions (speed and load) and axial bore profile details. These issues are investigated in this study due to their implication on engine oil consumption, friction and blow-by. The authors have developed an analytical expression to account for the effects of radial ring inertia due to an axial bore profile for implementation in a piston ring-pack simulation tool RINGPAK. Simulation results from a gasoline engine study are presented to illustrate the effects of engine speeds, ring tensions, and characteristics of axial bore profiles on ring radial dynamics and ring-liner lubrication. Relevant qualitative comparisons are made to experimental measurements available in the literature.
Skip Nav Destination
Article navigation
October 2003
Technical Papers
Numerical Investigation of the Effects of Axial Cylinder Bore Profiles on Piston Ring Radial Dynamics
Y. Piao,
Y. Piao
Ricardo, Inc., 7850 Grant Street, Burr Ridge, IL 60527
Search for other works by this author on:
S. D. Gulwadi
S. D. Gulwadi
Ricardo, Inc., 7850 Grant Street, Burr Ridge, IL 60527
Search for other works by this author on:
Y. Piao
Ricardo, Inc., 7850 Grant Street, Burr Ridge, IL 60527
S. D. Gulwadi
Ricardo, Inc., 7850 Grant Street, Burr Ridge, IL 60527
Contributed by the Internal Combustion Engine Division of THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS for publication in the ASME JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER. Manuscript received by the ICE Division, June 2002; final revision received Oct. 2002. Associate Editor: D. Assanis.
J. Eng. Gas Turbines Power. Oct 2003, 125(4): 1081-1089 (9 pages)
Published Online: November 18, 2003
Article history
Received:
June 1, 2002
Revised:
October 1, 2002
Online:
November 18, 2003
Citation
Piao , Y., and Gulwadi, S. D. (November 18, 2003). "Numerical Investigation of the Effects of Axial Cylinder Bore Profiles on Piston Ring Radial Dynamics ." ASME. J. Eng. Gas Turbines Power. October 2003; 125(4): 1081–1089. https://doi.org/10.1115/1.1610016
Download citation file:
Get Email Alerts
Shape Optimization of an Industrial Aeroengine Combustor to reduce Thermoacoustic Instability
J. Eng. Gas Turbines Power
Dynamic Response of A Pivot-Mounted Squeeze Film Damper: Measurements and Predictions
J. Eng. Gas Turbines Power
Review of The Impact Of Hydrogen-Containing Fuels On Gas Turbine Hot-Section Materials
J. Eng. Gas Turbines Power
Effects of Lattice Orientation Angle On Tpms-Based Transpiration Cooling
J. Eng. Gas Turbines Power
Related Articles
The Role of Piston Distortion on Lubrication in a Reciprocating Engine
J. Eng. Gas Turbines Power (July,1990)
Modeling the Lubrication, Dynamics, and Effects of Piston Dynamic Tilt of Twin-Land Oil Control Rings in Internal Combustion Engines
J. Eng. Gas Turbines Power (January,2000)
On the Effect of Transient In-Plane Dynamics of the Compression Ring Upon Its Tribological Performance
J. Eng. Gas Turbines Power (March,2015)
Piston Ring-Cylinder Bore Friction Modeling in Mixed Lubrication Regime: Part I—Analytical Results
J. Tribol (January,2001)
Related Proceedings Papers
Related Chapters
Introduction I: Role of Engineering Science
Fundamentals of heat Engines: Reciprocating and Gas Turbine Internal Combustion Engines
Later Single-Cylinder Engines
Air Engines: The History, Science, and Reality of the Perfect Engine
Fatigue Analysis in the Connecting Rod of MF285 Tractor by Finite Element Method
International Conference on Advanced Computer Theory and Engineering, 4th (ICACTE 2011)