Rotors with three or more fluid-film bearings (or fluid seals) have “redundant” supports, and, therefore, interdependent bearing loads that are generally unknown both in magnitude and direction. The steady-state bearing eccentricities and the dynamic stiffness and damping coefficients of the bearings are, therefore, also unknown since both are functions of the bearing loads. Thus, the dynamic behavior of multibearing rotors generally cannot be predicted with good accuracy without access to a procedure for calculating the steady-state bearing loads and eccentricities. This paper outlines such a procedure in terms of both the influence coefficient method, the transfer matrix method, and the finite element method. Radial bearing misalignment and flexibility of the bearing back-up structures are accounted for. Once the eccentricities are available, the bearing stiffness and damping coefficients can be calculated in the usual way and used to predict critical speeds, instability threshold speed, and rotor response to imbalance. A numerical example is presented that illustrates some of the nonlinear effects of bearing support redundancy, notably the large variations in instability threshold speed with radial bearing misalignment. The example shows how the method can be used to determine the level of bearing misalignment that leads to optimum rotor stability. It is concluded that no simple guide lines exist by which optimum stability can be achieved. Neither perfect bearing alignment nor equal load sharing between bearings necessarily lead to optimum stability.
Skip Nav Destination
Article navigation
July 1998
Research Papers
The Effect of Misalignment on Rotor Vibrations
J. L. Nikolajsen
J. L. Nikolajsen
Staffordshire University, School of Engineering, Stafford, ST18 0AD, England
Search for other works by this author on:
J. L. Nikolajsen
Staffordshire University, School of Engineering, Stafford, ST18 0AD, England
J. Eng. Gas Turbines Power. Jul 1998, 120(3): 635-640 (6 pages)
Published Online: July 1, 1998
Article history
Received:
January 31, 1996
Online:
November 19, 2007
Article
Article discussed|
View article
Connected Content
A commentary has been published:
Closure to “Discussion of ‘Uncertainties and CFD Code Validation’” (1998, ASME J. Fluids Eng., 120, p. 635)
Citation
Nikolajsen, J. L. (July 1, 1998). "The Effect of Misalignment on Rotor Vibrations." ASME. J. Eng. Gas Turbines Power. July 1998; 120(3): 635–640. https://doi.org/10.1115/1.2818193
Download citation file:
Get Email Alerts
Cited By
Shape Optimization of an Industrial Aeroengine Combustor to reduce Thermoacoustic Instability
J. Eng. Gas Turbines Power
Dynamic Response of A Pivot-Mounted Squeeze Film Damper: Measurements and Predictions
J. Eng. Gas Turbines Power
Review of The Impact Of Hydrogen-Containing Fuels On Gas Turbine Hot-Section Materials
J. Eng. Gas Turbines Power
Effects of Lattice Orientation Angle On Tpms-Based Transpiration Cooling
J. Eng. Gas Turbines Power
Related Articles
Dynamic Analysis of Three-Foil Rotor Support System in Zero Gravity Environment
J. of Lubrication Tech (October,1970)
Theoretical and Experimental Comparisons for Damping Coefficients of a Short-Length Open-End Squeeze Film Damper
J. Eng. Gas Turbines Power (October,1996)
On the Lubrication and Stability Behaviors of a Conical Hybrid Floating Ring Bearing With Thermal Effects
J. Tribol (June,2023)
A Parametric Analysis of the Transient Forced Response of Noncontacting Coned-Face Gas Seals
J. Tribol (January,2002)
Related Proceedings Papers
Related Chapters
Average Shaft Centerline Plots
Fundamentals of Rotating Machinery Diagnostics
Research Tools
Bearing Dynamic Coefficients in Rotordynamics: Computation Methods and Practical Applications
Summary and Conclusions
Bearing Dynamic Coefficients in Rotordynamics: Computation Methods and Practical Applications