A detailed experimental study on flow maldistribution from port to channel of a plate heat exchanger is presented. In general, flow maldistribution brings about an increase in pressure drop across the heat exchanger. This increase is found to depend on flow rate, number of channels and port size. Experiments show that analytical predictions of pressure drop including maldistribution effect are quite accurate for practical purposes. The results indicate that under identical conditions, maldistribution is more severe in Z-type plate heat exchanger compared to U type. Experiments are also carried out under non-isothermal realistic operating conditions, which show increased flow maldistribution at elevated temperature. Finally predictions are made for industrial plate heat exchangers, which show the limitation of adding additional plates beyond a certain limit. An insight to the physical aspects of maldistribution and its possible reduction through proper design strategy is also indicated.

Issue Section:
Additional Technical Papers
Keywords:
channel flow, heat transfer, heat exchangers, pressure
Topics:
Flow (Dynamics), Heat exchangers, Pressure drop
1.
Mueller
,
A. C.
, and
Chiou
,
J. P.
,
1988
, “
Review of Various Types of Flow Maldistribution in Heat Exchangers
,”
Heat Transfer Eng.
,
9
(
2
), pp.
36
–
50
.
2.
Bajura
,
R. A.
,
1971
, “
A Model for Flow Distribution in Manifolds
,” ASME J. Eng. Power, pp. 7–12, January.
3.
Bajura
,
R. A.
, and
Jones
, Jr.,
E. H.
,
1976
, “
Flow Distribution Manifolds
,”
ASME J. Fluids Eng.
,
98
, pp.
654
–
666
.
4.
Bassiouny
,
M. K.
, and
Martin
,
H.
,
1984
, “
Flow Distribution and Pressure Drop in Plate Heat Exchangers-I, U-Type Arrangement
,”
Chem. Eng. Sci.
,
39
(
4
), pp.
693
–
700
.
5.
Bassiouny
,
M. K.
, and
Martin
,
H.
,
1984
, “
Flow Distribution and Pressure Drop in Plate Heat Exchangers-II, Z-Type Arrangement
,”
Chem. Eng. Sci.
,
39
(
4
), pp.
701
–
704
.
6.
Datta
,
A. B.
, and
Majumdar
,
A. K.
,
1980
, “
Flow Distribution in Parallel and Reverse Flow Manifolds
,”
Int. J. Heat Fluid Flow
,
2
(
4
), pp.
253
–
262
.
7.
Kitto
, Jr.,
J. B.
, and
Robertson
,
J. M.
,
1989
, “
Effects of Maldistribution of Flow on Heat Transfer Equipment Performance
,”
Heat Transfer Eng.
,
10
(
1
), pp.
18
–
25
.
8.
Huang, L., 2001, “Port Flow Distribution in Plate Heat Exchangers,” Proceedings of the Third International Conference on Compact Heat Exchangers and Enhancement Technology for the Process Industries, Davos, Switzerland, pp. 259–264, July.
9.
Muley, Arun., and Manglik, R. M., 1995, “Experimental Investigation of Heat Transfer Enhancement in a PHE With β=60° Chevron Plates,” Proceedings of the Second ISHMT-ASME Heat and Mass Transfer Conference and Thirteenth National Heat and Mass Transfer Conference, Dec 28–30.
10.
Rao
,
Prabhakara
,
B.
,
Krishna, Kumar
,
P.
, and
Sarit
,
K., Das.
,
2002
, “
Effect of Flow Distribution to the Channels on the Thermal Performance of a Plate Heat Exchanger
,”
Dokl. Akad. Nauk UzSSR
,
41
, pp.
49
–
58
.
11.
Moffat
,
R. J.
,
1988
, “
Describing the Uncertainties in Experimental Results
,”
Exp. Therm. Fluid Sci.
,
1
, pp.
3
–
17
.
Copyright © 2004
 by ASME
You do not currently have access to this content.