In-situ measurements were performed on organic based substrates under mechanical loading as well as land grid array electronic packages under thermal cycling. Whole field displacement measurements obtained from this analysis were compared with results obtained from similar finite element models. The experimental flexibility and results obtained from speckle interferometry indicate that this method has several substantial benefits over moire´ interferometry. Due to coefficient of thermal expansion mismatches between the package and printed circuit board, creep shear strains developed in the 63/37 SnPb solder. When thermally loaded, these creep shear strains develop cracks in the joint leading to Mode II failure. A single thermal half cycle from 25°C to 125°C was applied to a specimen to simulate the fatigue life of the solder joints undergoing thermal loading and the resulting strains were entered into the Engelmaier reliability prediction model for 63/37 SnPb solder. The experimental results yielded 0.59% strain per cycle with 7485 cycles to failure.
Skip Nav Destination
Article navigation
September 2002
Papers On Reliability
Validation of Electronic Package Reliability Using Speckle Interferometry
H.-Y. Yeh,
H.-Y. Yeh
Mechanical Engineering Department, California State University, Long Beach, Long Beach, CA 90840
Search for other works by this author on:
K. Cote
K. Cote
Mechanical Engineering Department, California State University, Long Beach, Long Beach, CA 90840
Search for other works by this author on:
H.-Y. Yeh
Mechanical Engineering Department, California State University, Long Beach, Long Beach, CA 90840
K. Cote
Mechanical Engineering Department, California State University, Long Beach, Long Beach, CA 90840
Contributed by the Electronic and Photonic Packaging Division for publication in the JOURNAL OF ELECTRONIC PACKAGING. Manuscript received at ASME Headquarters September 19, 2001. Associate Editor: D. T. Read.
J. Electron. Packag. Sep 2002, 124(3): 277-280 (4 pages)
Published Online: July 26, 2002
Article history
Received:
September 19, 2001
Online:
July 26, 2002
Citation
Yeh , H., and Cote, K. (July 26, 2002). "Validation of Electronic Package Reliability Using Speckle Interferometry ." ASME. J. Electron. Packag. September 2002; 124(3): 277–280. https://doi.org/10.1115/1.1478060
Download citation file:
Get Email Alerts
Cited By
Sequential Versus Concurrent Effects in Combined Stress Solder Joint Reliability
J. Electron. Packag
Anand Model Constants of Sn-Ag-Cu Solders: What Do They Actually Mean?
J. Electron. Packag
Related Articles
Measurement of Thermal Deformation of Interconnect Layers Using SIEM
J. Electron. Packag (September,2002)
Solder Joint Reliability of Wafer Level Chip Scale Packages (WLCSP): A Time-Temperature-Dependent Creep Analysis
J. Electron. Packag (December,2000)
Effect of Underfill Thermomechanical Properties on Thermal Cycling Fatigue Reliability of Flip-Chip Ball Grid Array
J. Electron. Packag (December,2004)
Measurement of Creep and Relaxation Behaviors of Wafer-Level CSP Assembly Using Moire´ Interferometry
J. Electron. Packag (June,2003)
Related Proceedings Papers
Related Chapters
Achievements, Challenges, and Opportunities
Computer Vision for Structural Dynamics and Health Monitoring
STRUCTURAL RELIABILITY ASSESSMENT OF PIPELINE GIRTH WELDS USING GAUSSIAN PROCESS REGRESSION
Pipeline Integrity Management Under Geohazard Conditions (PIMG)
Reliability of Electronic Packaging
Essentials of Electronic Packaging: A Multidisciplinary Approach