... blocks. Membrane electrode assemblies (MEAs) with catalyst and gas flow rates at two levels each (0.5 mg/cm 2 , 1 mg/cm 2 ; 0.3 l/min, 0.5 l/min, respectively) were tested at 60 °C without humidification. The cell performance was analyzed by taking ac impedance, Tafel plot, open circuit voltage, and area...

... by the shoulders of the bipolar plates due to the compression applied in the assembly process. Compression therefore influences the water management inside fuel cells. A two-phase fuel cell model was used to study the water management problem in a proton exchange membrane fuel cell with interdigitated flow...

... in the catalyst layer could help the recovery of the PEMFC from CO poisoning. By using feeding channel pressure swing, oxygen can easily diffuse into the membrane electrode assembly (MEA) from the outlet port and promote a quick recovery. Using these operational strategies, a PEMFC could operate continually using...

...Yean-Der Kuan; Chia-Hao Chang The printed circuit board (PCB)-based direct methanol fuel cell (DMFC) package is a novel manufacturing and assembly process, which is full potential in mass production, and very limited literatures make study on the effects of the related process parameters. The hot...