Skip Nav Destination
Issues
February 2008
This article was originally published in
Journal of Fuel Cell Science and Technology
ISSN 1550-624X
EISSN 1551-6989
In this Issue
Research Papers
Protective Coatings of Metallic Interconnects for IT-SOFC Application
M. Bertoldi, T. Zandonella, D. Montinaro, V. M. Sglavo, Alessio Fossati, A. Lavacchi, C. Giolli, U. Bardi
J. Fuel Cell Sci. Technol. February 2008, 5(1): 011001.
doi: https://doi.org/10.1115/1.2713761
Ag–Cu–Ti Braze Materials for Sealing SOFCs
J. Fuel Cell Sci. Technol. February 2008, 5(1): 011002.
doi: https://doi.org/10.1115/1.2784279
Topics:
Brazing
,
Filler metals
,
Sealing (Process)
,
Solid oxide fuel cells
,
Annealing
,
Titanium
,
Metals
,
Fillers (Materials)
Yttrium-Doped Barium Zirconates as Ceramic Conductors in the Intermediate Temperature Range
J. Fuel Cell Sci. Technol. February 2008, 5(1): 011003.
doi: https://doi.org/10.1115/1.2756570
Demonstration of a 4-Cells SOFC Stack Under Different Experimental Conditions
J. Fuel Cell Sci. Technol. February 2008, 5(1): 011004.
doi: https://doi.org/10.1115/1.2398952
Topics:
Anodes
,
Flow (Dynamics)
,
Fuels
,
Solid oxide fuel cells
,
Hydrogen
,
Power density
,
Stainless steel
,
Electrolytes
,
Temperature
,
Electrical efficiency
Load Response Characteristics of the Proton Exchange Membrane Fuel Cell for Individual Cold-Region Houses
J. Fuel Cell Sci. Technol. February 2008, 5(1): 011005.
doi: https://doi.org/10.1115/1.2744054
A Detailed Three-Dimensional Simulation of an IP-SOFC Stack
J. Fuel Cell Sci. Technol. February 2008, 5(1): 011006.
doi: https://doi.org/10.1115/1.2786468
Topics:
Flow (Dynamics)
,
Fuel cells
,
Solid oxide fuel cells
,
Temperature
,
Fuels
,
Water
,
Hydrogen
,
Simulation
,
Anodes
,
Electrochemical reactions
A Nonisothermal PEM Fuel Cell Model Including Two Water Transport Mechanisms in the Membrane
J. Fuel Cell Sci. Technol. February 2008, 5(1): 011007.
doi: https://doi.org/10.1115/1.2822884
Topics:
Gas diffusion layers
,
Membranes
,
Proton exchange membrane fuel cells
,
Water
,
Catalysts
,
Heat
,
Two-phase flow
,
Flow (Dynamics)
,
Protons
Micromachined Methanol Reformer for Portable PEM Fuel Cells
J. Fuel Cell Sci. Technol. February 2008, 5(1): 011008.
doi: https://doi.org/10.1115/1.2784277
Control-Oriented Modeling and Analysis of Air Management System for Fuel Reforming Fuel Cell Vehicle
J. Fuel Cell Sci. Technol. February 2008, 5(1): 011009.
doi: https://doi.org/10.1115/1.2784323
Topics:
Flow (Dynamics)
,
Fuel cell vehicles
,
Fuels
,
Modeling
,
Pipes
,
Pressure
,
Temperature
,
Fuel cells
,
Fuel cell power plants
,
Compressors
Study of the Rate Limiting Step of the Cathodic Process in Anode Supported Solid Oxide Fuel Cell
J. Fuel Cell Sci. Technol. February 2008, 5(1): 011010.
doi: https://doi.org/10.1115/1.2784295
Topics:
Anodes
,
Electrodes
,
Electrolytes
,
Oxygen
,
Solid oxide fuel cells
,
Temperature
,
Composite materials
Influence of the Temperature on Oxygen Reduction on SOFC Composite Electrodes: Theoretical and Experimental Analysis
J. Fuel Cell Sci. Technol. February 2008, 5(1): 011011.
doi: https://doi.org/10.1115/1.2786461
Topics:
Composite materials
,
Electrodes
,
Mass transfer
,
Oxygen
,
Solid oxide fuel cells
,
Temperature
,
Electrolytes
Development of a Cylindrical Shape Self-Breathing Mini Fuel Cell Stack
J. Fuel Cell Sci. Technol. February 2008, 5(1): 011012.
doi: https://doi.org/10.1115/1.2786462
Topics:
Fuel cells
,
Diffusion (Physics)
,
Shapes
Fuel Economy and Emission Performance of Fuel Cell-Based Diesel HEVs
J. Fuel Cell Sci. Technol. February 2008, 5(1): 011013.
doi: https://doi.org/10.1115/1.2786470
Topics:
Corporate average fuel economy
,
Diesel
,
Emissions
,
Fuel cells
,
Fuel efficiency
,
Fuels
,
Gasoline
,
Vehicles
,
Wheels
,
Diesel engines
Macroscopic Modeling of a PEFC System Based on Equivalent Circuits of Fuel and Oxidant Supply
J. Fuel Cell Sci. Technol. February 2008, 5(1): 011015.
doi: https://doi.org/10.1115/1.2786471
Topics:
Circuits
,
Compressors
,
Electrolytes
,
Flow (Dynamics)
,
Fuel cells
,
Fuels
,
Hydrogen
,
Modeling
,
Polymers
,
Simulation
Modeling and Study of the Influence of Sealing on a Solid Oxide Fuel Cell
J. Fuel Cell Sci. Technol. February 2008, 5(1): 011016.
doi: https://doi.org/10.1115/1.2784333
Topics:
Anodes
,
Combustion
,
Diffusion (Physics)
,
Hydrogen
,
Modeling
,
Simulation
,
Solid oxide fuel cells
,
Reliability
,
Sealants
,
Polarization (Electricity)
Technical Briefs
Improvement of CO Tolerance of Proton Exchange Membrane Fuel Cell by an Air-Bleeding Technique
J. Fuel Cell Sci. Technol. February 2008, 5(1): 014501.
doi: https://doi.org/10.1115/1.2784278
Topics:
Anodes
,
Fuel cells
,
Proton exchange membrane fuel cells
,
Transients (Dynamics)
,
Fuels
,
Carbon
,
Catalysts
Experimental Results of a PEM System Operated on Hydrogen and Reformate
J. Fuel Cell Sci. Technol. February 2008, 5(1): 014502.
doi: https://doi.org/10.1115/1.2784324
Measuring Open Circuit Voltage in a Glucose Alkaline Fuel Cell Operated as a Continuous Stirred Tank Reactor
J. Fuel Cell Sci. Technol. February 2008, 5(1): 014503.
doi: https://doi.org/10.1115/1.2784334
Topics:
Circuits
,
Fuel cells
,
Glucose
,
Water
Errata
Erratum: “Quality Assurance and Solid Oxide Fuel Cell Testing at Forschungszentrum Jülich” [Journal of Fuel Cell Science and Technology, 2007, 4(2), pp. 194–202]
J. Fuel Cell Sci. Technol. February 2008, 5(1): 017001.
doi: https://doi.org/10.1115/1.2786472
Topics:
Fuel cell technology
,
Quality control
,
Solid oxide fuel cells
,
Testing
Email alerts
RSS Feeds
Optimization of thermal non-uniformity challenges in liquid-cooled lithium-ion battery packs using NSGA-II
J. Electrochem. En. Conv. Stor
Ultrasound-enabled adaptive protocol for fast charging of lithium-ion batteries
J. Electrochem. En. Conv. Stor
Effects of Sintering Temperature on the Electrical Performance of Ce0.8Sm0.2O1.9–Pr2NiO4 Composite Electrolyte for SOFCs
J. Electrochem. En. Conv. Stor (August 2025)
Joint Model Parameter Identification and EKF Algorithm for the SOC Estimation of LFP Battery
J. Electrochem. En. Conv. Stor