A series of experiments was conducted to examine the cathode airflow effect on a direct methanol fuel cell (DMFC) via the views of both airflow rate and airflow velocity from a single cell into a three-cell printed circuit board-based DMFC module. The objective of this paper is to discuss the relationship or difference between a single cell and a planar module. All experiments conducted were under constant anode fuel flow rate and operating temperature. The results show that the airflow supplied to a planar DMFC module does not just multiply the number of membrane electrode assemblies (MEAs) to a suitable airflow rate obtained from a single cell DMFC test. The results also show that the cathode airflow velocity effect is more significant than the airflow rate effect.

1.
Hoogers
,
G.
, 2003,
Fuel Cell Technology Handbook
,
CRC
,
Boca Raton, FL
.
2.
Williams
,
Mark C.
, 2000,
Fuel Cell Handbook
, 5th ed.,
Parson, Inc., Science Applications International Corporation
,
West Virginia
.
3.
Foley
,
D.
, 2003,
NEC Unveil Notebook PC With Built-in Fuel Cell
,
NEC
,
Japan
.
5.
Xie
,
C.
, 2003, “
Direct Methanol Fuel Cell (DMFC) System for Portable Communication Applications: Prospects and Challenges
,”
Proceedings of the 2003 Taipei Power Forum
,
Taipei, Taiwan
, Dec. 1–3, pp.
F7
-1–F7-
8
.
6.
Middelman
,
E.
,
Kout
,
W.
, and
Vogelaar
,
B.
, 2003, “
Bipolar Plates for PEM Fuel Cells
,”
J. Power Sources
0378-7753,
118
, pp.
44
46
.
7.
Scholta
,
J.
,
Rohland
,
B.
,
Trapp
,
V.
, and
Focken
,
U.
, 1999, “
Investigations on Novel Low-Cost Graphite Composite Bipolar Plates
,”
J. Power Sources
0378-7753,
84
, pp.
231
234
.
8.
Oh
,
M. H.
,
Yoon
,
Y. S.
, and
Park
,
S. G.
, 2004, “
The Electrical and Physical Properties of Alterative Material Bipolar Plate for PEM Fuel Cell System
,”
Electrochim. Acta
0013-4686,
50
, pp.
777
780
.
9.
Makkus
,
R. C.
,
Jansseen
,
A. H. H.
,
de Bruijn
,
F. A.
, and
Mallant
,
R. K. A. M.
, 2000, “
Stainless Steel for Cost-Competitive Bipolar Plates in PEMFCs
,”
Fuel Cells Bull.
1464-2859,
3
(
17
), pp.
5
9
.
10.
Hodgson
,
D. R.
,
May
,
B.
,
Adcock
,
P. L.
, and
Davies
,
D. P.
, 2001, “
New Lightweight Bipolar Plate System for Polymer Electrolyte Membrane Fuel Cells
,”
J. Power Sources
0378-7753,
96
, pp.
233
235
.
11.
Wind
,
J.
,
Späh
,
R.
,
Kaiser
,
W.
, and
Böhm
,
G.
, 2002, “
Metallic Bipolar Plates for PEM Fuel Cells
,”
J. Power Sources
0378-7753,
105
, pp.
256
260
.
12.
Narayanan
,
S. R.
,
Kindler
,
A.
,
Jeffries-Nakamura
,
B.
,
Chun
,
W.
,
Frank
,
H.
,
Smart
,
M.
,
Valdez
,
T. I.
,
Surampudi
,
S.
,
Halpert
,
G.
,
Kosek
,
J.
, and
Cropley
,
C.
, 1996, “
Recent Advances in PEM Liquid Feed Direct Methanol Fuel Cells
,”
Proceedings of the 11th Annual Battery Conference on Applications and Advances
,
Long Beach, CA
, Jan. 9–12, pp.
113
122
.
13.
Guo
,
H.
,
Ma
,
C. F.
,
Wang
,
M. H.
,
Ye
,
F.
,
Yu
,
J.
,
Wang
,
Y.
, and
Wang
,
C. Y.
, 2004, “
Experimental Investigation of Effect of Flow Bed Design on Performance of Liquid Feed Direct Methanol Fuel Cell
,”
Fuel Cells
,
4
(
1–2
), pp.
86
89
. 0013-4686
14.
Yang
,
H.
, and
Zhao
,
T. S.
, 2005, “
Effect of Anode Flow Field Design on the Performance of Liquid Feed Direct Methanol Fuel Cells
,”
Electrochim. Acta
0013-4686,
50
, pp.
3243
3252
.
15.
Ge
,
J.
, and
Liu
,
H.
, 2005, “
Experimental Studies of a Direct Methanol Fuel Cell
,”
J. Power Sources
0378-7753,
142
, pp.
56
69
.
16.
Qi
,
Z.
, and
Kaufman
,
A.
, 2002, “
Open Circuit Voltage and Methanol Crossover in DMFCs
,”
J. Power Sources
0378-7753,
110
, pp.
177
185
.
17.
Nakagawa
,
N.
, and
Xiu
,
Y.
, 2003, “
Performance of a Direct Methanol Fuel Cell Operated at Atmospheric Pressure
,”
J. Power Sources
0378-7753,
118
, pp.
248
255
.
18.
Cowart
,
J. S.
, 2005, “
An Experimental and Modeling Based Investigation Into the High Stoichiometric Flow Rates Required in Direct Methanol Fuel Cells
,”
J. Power Sources
,
143
, pp.
30
35
. 0378-7753
19.
Guvelioglu
,
G. H.
, and
Stenger
,
H. G.
, 2007, “
Flow Rate and Humidification Effects on a PEM Fuel Cell Performance and Operation
,”
J. Power Sources
,
163
, pp.
882
891
. 0378-7753
You do not currently have access to this content.