A novel Udwadia-Kalaba approach for parallel manipulator dynamics analysis is presented. The approach segments a parallel manipulator system into several leg-subsystems and the platform subsystem, which are connected by kinematic constraints. The Udwadia-Kalaba equation is then used to calculate the constraint forces due to the constraints. Based on this, the equation of motion, which is an explicit (i.e., closed) form, can be formulated. The method allows a systematic procedure to generate the dynamic model for both direct dynamics and inverse dynamics without invoking additional variables (such as multipliers or quasi-variables), nor does it require projection. A classical parallel Stewart-Gough platform is chosen to demonstrate the feasibility and advantages of this approach.
Skip Nav Destination
Design and Manufacturing for Vehicle Body,
Hunan University,
e-mail: huangjin0107@gmail.com
Article navigation
November 2013
Research-Article
Udwadia-Kalaba Approach for Parallel Manipulator Dynamics
Jin Huang,
Design and Manufacturing for Vehicle Body,
Hunan University,
e-mail: huangjin0107@gmail.com
Jin Huang
1
The State Key Laboratory of Advanced
Design and Manufacturing for Vehicle Body,
Hunan University,
Changsha, Hunan 410082
, China
e-mail: huangjin0107@gmail.com
1Present address: George W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA 30332.
Search for other works by this author on:
Y. H. Chen,
Y. H. Chen
2
Professor
of Mechanical Engineering,
Georgia Institute of Technology,
e-mail: yehwa.chen@me.gatech.edu
The George W. Woodruff School
of Mechanical Engineering,
Georgia Institute of Technology,
Atlanta, GA 30332
e-mail: yehwa.chen@me.gatech.edu
2Corresponding author.
Search for other works by this author on:
Zhihua Zhong
Zhihua Zhong
Professor
Design and Manufacturing for Vehicle Body,
College of Mechanical and Vehicle Engineering,
Hunan University,
The State Key Laboratory of Advanced
Design and Manufacturing for Vehicle Body,
College of Mechanical and Vehicle Engineering,
Hunan University,
Changsha, Hunan 410082
, China
Search for other works by this author on:
Jin Huang
The State Key Laboratory of Advanced
Design and Manufacturing for Vehicle Body,
Hunan University,
Changsha, Hunan 410082
, China
e-mail: huangjin0107@gmail.com
Y. H. Chen
Professor
of Mechanical Engineering,
Georgia Institute of Technology,
e-mail: yehwa.chen@me.gatech.edu
The George W. Woodruff School
of Mechanical Engineering,
Georgia Institute of Technology,
Atlanta, GA 30332
e-mail: yehwa.chen@me.gatech.edu
Zhihua Zhong
Professor
Design and Manufacturing for Vehicle Body,
College of Mechanical and Vehicle Engineering,
Hunan University,
The State Key Laboratory of Advanced
Design and Manufacturing for Vehicle Body,
College of Mechanical and Vehicle Engineering,
Hunan University,
Changsha, Hunan 410082
, China
1Present address: George W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA 30332.
2Corresponding author.
Contributed by the Dynamic Systems Division of ASME for publication in the Journal of Dynamic Systems, Measurement, and Control. Manuscript received March 8, 2011; final manuscript received March 2, 2013; published online August 23, 2013. Assoc. Editor: Eugenio Schuster.
J. Dyn. Sys., Meas., Control. Nov 2013, 135(6): 061003 (11 pages)
Published Online: August 23, 2013
Article history
Received:
March 8, 2011
Revision Received:
March 2, 2013
Citation
Huang, J., Chen, Y. H., and Zhong, Z. (August 23, 2013). "Udwadia-Kalaba Approach for Parallel Manipulator Dynamics." ASME. J. Dyn. Sys., Meas., Control. November 2013; 135(6): 061003. https://doi.org/10.1115/1.4024600
Download citation file:
Get Email Alerts
A Method for Designing of Hydraulic Actuators Using Digital Hydraulic Pump and Multi-Chamber Cylinder
J. Dyn. Sys., Meas., Control
A Method for Robust Partial Quadratic Eigenvalue Assignment with Repeated Eigenvalues
J. Dyn. Sys., Meas., Control
Designing Hybrid Neural Network Using Physical Neurons - A Case Study of Drill Bit-Rock Interaction Modeling
J. Dyn. Sys., Meas., Control
Linear Quadratic Regulator for Delayed Systems Using the Hamiltonian Approach and Exact Closed-Loop Poles for First-Order Systems
J. Dyn. Sys., Meas., Control (July 2023)
Related Articles
Evaluation of Nonlinear Dynamics Using Optimal Motion Planning
J. Dyn. Sys., Meas., Control (December,2006)
Riccati Discrete Time Transfer Matrix Method for Dynamic Modeling and Simulation of an Underwater Towed System
J. Appl. Mech (July,2012)
Dynamic Behavior of Flexible Multiple Links Captured Inside a Closed Space
J. Comput. Nonlinear Dynam (September,2016)
Dynamic Modeling of a Six Degree-of-Freedom Flight Simulator Motion Base
J. Comput. Nonlinear Dynam (September,2015)
Related Proceedings Papers
Related Chapters
Dynamic Modeling of a New Snake Robot Using SMA Actuators
International Conference on Mechanical and Electrical Technology, 3rd, (ICMET-China 2011), Volumes 1–3
Dynamic Modeling and Analysis of Nonlinear Flexible Rotors Supported by Viscoelastic Bearings
Advanced Multifunctional Lightweight Aerostructures: Design, Development, and Implementation
The Vector Bond Graph Method for the Dynamic Modeling of 3-RSR Spatial Parallel Robot Mechanism
International Conference on Control Engineering and Mechanical Design (CEMD 2017)