This paper presents a model-based sliding mode control law for mechanical systems, which use shape memory alloys (SMAs) as actuators. The systems under consideration are assumed to be fully actuated and represented by unconstrained equations of motion. A system model is developed by combining the equations of motion with SMA heat convection, constitutive law, and phase transformation equations, which account for hysteresis. The control law is introduced using asymptotically stable second-order sliding surfaces. Robustness is guaranteed through the inclusion of modeling uncertainties in the controller development. The control law is developed assuming only positions are available for measurement. The unmeasured states, which include velocities and SMA temperatures and stresses, are estimated using an extended Kalman filter based on the nonlinear system model. The control law is applied to a three-link planar robot for position control problem. Simulation and experimental results show good agreement and verify the robustness of the control law despite significant modeling uncertainty.
Sliding Mode Control of Mechanical Systems Actuated by Shape Memory Alloy
- Views Icon Views
- Share Icon Share
- Search Site
Ashrafiuon, H., and Jala, V. R. (December 8, 2008). "Sliding Mode Control of Mechanical Systems Actuated by Shape Memory Alloy." ASME. J. Dyn. Sys., Meas., Control. January 2009; 131(1): 011010. https://doi.org/10.1115/1.3023121
Download citation file: