In this paper, we propose a control scheme of parallel manipulators focusing on the accuracy of acceleration on the end plate, an important factor when parallel manipulators are used as acceleration displays such as a driving simulator. In order to achieve a smooth and accurate acceleration on the end plate, we combine two controllers: A dynamic controller to achieve accuracy of the position and to stabilize the system, and an H controller to feedback the acceleration of the end plate to cope with the unmodeled dynamics such as mechanical flexibility and friction. The main problem of dynamic control is computational complexity. We applied parallel processing to reduce the latency and realized real-time dynamic control. The designed H controller is added outside the closed loop of dynamic control to remove the vibration of the structure and the influence of unmodeled dynamics.

1.
Stewart
,
D.
, 1966, “
A Platform with Six Degrees of Freedom
,”
Proc. Inst. Mech. Eng.
0020-3483,
180-1
, pp.
371
386
.
2.
Luh
,
J. Y. S.
,
Walker
,
M. W.
, and
Paul
,
R. P. C.
, 1980, “
Resolved Acceleration Control of Mechanical Manipulators
,”
IEEE Trans. Autom. Control
0018-9286,
25
, pp.
468
474
.
3.
Kleinfinger
,
J. F.
, and
W.
Khalil
, 1986, “
Dynamic Modeling of Closed-Loop Robots
,” in
Proceedings of the 16th International Symposium on Industrial Robots
, pp.
401
412
.
4.
Nakamura
,
Y.
, and
Ghodoussi
,
M.
, 1989, “
Dynamics Computation of Closed-Link Robot Mechanisms with Nonredundant and Redundant Actuators
,”
IEEE Trans. Rob. Autom.
1042-296X,
5
, pp.
294
302
.
5.
Nakamura
,
Y.
, and
Yamane
,
K.
, 2000, “
Dynamics Computation of Structure-Varying Kinematic Chains and Its Application to Human Figures
,”
IEEE Trans. Rob. Autom.
1042-296X,
16
, pp.
124
134
.
6.
Codourey
,
A.
, and
Burdet
,
E.
, 1997, “
A Body-Oriented Method for Finding a Linear Form of the Dynamic Equation of Fully Parallel Robots
,” in
Proceedings of IEEE International Conference on Robotics and Automation
, pp.
1612
1618
.
7.
Merlet
,
J.-P.
, 1997,
Les robots paralléles
,
Hermés
, Paris.
8.
Ait-Ahmed
,
M.
, and
Renaud
,
M.
, 1992, “
Dynamic Modeling of Closed-Chain Mechanisms and Its Application for a 6 D.O.F. Actuated Manipulator
,” in
Proceedings of the 1st International Conference in Electronics and Automatic Control
, pp.
203
209
.
9.
Gevers
,
M.
, 1993,
Towards a Design of Identification and Control?
,
Trentelman
,
Willems
Eds. (
Birkhäuser
), pp.
111
151
.
10.
Sugie
,
T.
, and
Okada
,
M.
, 1995, “
Iterative controller design method on closed-loop identification
,” in
Proceedings of the 3rd ECC
,
2
, pp.
1243
1248
.
11.
Luh
,
J. Y. S.
,
Walker
,
M. W.
, and
Paul
,
R. P. C.
, 1980, “
On-line Computational Scheme for Mechanical Manipulators
,”
ASME J. Dyn. Syst., Meas., Control
0022-0434,
104
, pp.
69
76
.
12.
Raghavan
,
M.
, 1993, “
The Stewart Platform of General Geometry Has 40 Configurations
,”
ASME J. Mech. Des.
1050-0472,
115
, pp.
277
282
.
13.
Mourrain
,
B.
, 1993, “
The 40 “Generic” Positions of a Parallel Robot
,” in
Proceedings of the 1993 International Symposium on Symbolic and Algebraic Computation
, pp.
173
182
.
14.
Orin
,
D. E.
, and
Schrader
,
W. W.
, 1984, “
Efficient computation of the jacobian for robot manipulators
,”
Int. J. Robot. Res.
0278-3649,
3
, pp.
66
75
.
15.
Nakamura
,
Y.
,
Yokokohji
,
Y.
,
Hanafusa
,
H.
, and
Yoshikawa
,
T.
, 1986, “
Unified Recursive Formulation of Kinematics and Dynamics for Robot Manipulators
,” in
Proceedings of Japan-USA Symposium on Flexible Automation
, pp.
53
60
.
16.
Lewis
,
B.
, and
Berg
,
D. J.
, 1996, Threads Primer,
Sun Soft Inc.
.
17.
Takeda
,
Y.
, and
Funahashi
,
H.
, 1993, “
A Development of a Spatial In-parallel Actuated Manipulator with Six Degree of Freedom with Consideration of Motion Transmissibility
,” in
Proceedings of 1993 Conference of Robotics Society of Japan
, pp.
853
856
.
18.
Ljung
,
L.
, 1987,
System Identification-Theory for the User
,
Prentice-Hall
, Englewood Cliffs, New Jersey.
You do not currently have access to this content.