0
research-article

Numerical investigations of flow and heat transfer characteristics between turbulent double jet impingement and a moving plate

[+] Author and Article Information
N Satish

Kandi, Sangareddy Hyderabad, Telangana 502285 India me14resch11005@iith.ac.in

Venkatasubbaiah Kondapalli

Department of Mechanical and Aerospace Engineering Kandi, Sangareddy Hyderabad, Telangana 502285 India kvenkat@iith.ac.in

1Corresponding author.

Contributed by the Heat Transfer Division of ASME for publication in the Journal of Thermal Science and Engineering Applications. Manuscript received May 24, 2018; final manuscript received December 20, 2018; published online xx xx, xxxx. Assoc. Editor: Yit Fatt Yap.

ASME doi:10.1115/1.4042584 History: Received May 24, 2018; Accepted December 20, 2018

Abstract

The analysis of fluid flow and heat transfer characteristics of double turbulent jet flow impinging on a stationary and moving plate has been studied numerically. Unsteady state two dimensional incompressible turbulent forced convection flow is considered for present analysis. Turbulence is modelled by Reynolds Averaged Navier-Stokes (RANS) equation with k − ɛ model and enhanced wall treatment at the wall. The governing equations are solved using a finite volume based commercial solver. Results for effect of single jet and double jet, jet Reynolds number, plate velocity, location and center spacing between two jets on flow and heat transfer characteristics are reported. Results show that enhancement of heat transfer is 32.70% for double jet compared to single jet impingement on a stationary plate. Significant enhancement of heat transfer is observed with increase in second jet Reynolds number and plate velocity. Results show that the size and shape of the recirculation zones between jets are greatly altered with respect to spacing between jets to plate and centre distance between jets. Results show that the enhancement of heat transfer is 37.3% for moving plate velocity with decreasing the spacing between jets and plate from 6 to 4. Results show that the local peak Nusselt number is influenced by the plate velocity. The present results are validated with experimental and numerical results available in the literature.

Copyright © 2019 by ASME
Your Session has timed out. Please sign back in to continue.

References

Figures

Tables

Errata

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In