A solution to the problem of a hydraulic fracture driven by an incompressible Newtonian fluid at a constant injection rate in a permeable rock is presented in this paper. A set of governing equations are formed to obtain the fracture half-length, crack opening, and net fluid pressure. The solution is derived under the assumptions of plane strain, zero lag between fluid front and crack tip, followed by negligible fluid viscosity. The last assumption is related to a toughness-dominated fracture propagation regime therefore leading to a uniform fluid pressure along the crack surface. Early-time and late-time asymptotic solutions are obtained, which correspond to both regimes when the fluid contains within the crack and most of the injected fluid infiltrates into the rock, respectively. It is shown that these asymptotic solutions are in a simple form when the fracture propagation is dominated by the material toughness. The transient solution for the evolution from the early time to the late time is also obtained by a numerical method.
Issue Section:
Research Papers
References
1.
Rodrigues
, V. F.
, Neumann
, L. F.
, Torres
, D. S.
, Guimaraes De Carvalho
, C. R.
, and Torres
, R. S.
, 2007
, “Horizontal Well Completion and Stimulation Techniques—A Review With Emphasis on Low-Permeability Carbonates
,” Latin American and Caribbean Petroleum Engineering Conference
, Buenos Aires, Argentina, Apr. 15–18, SPE
Paper No. SPE-108075-MS.2.
King
, G. E.
, 2010
, “Thirty Years of Gas Shale Fracturing: What Have We learned?
,” SPE Annual Technical Conference and Exhibition
, Florence, Italy, Sept. 19–22, SPE
Paper No. SPE-133256-MS.3.
Zhang
, X.
, Detournay
, E.
, and Jeffrey
, R.
, 2002
, “Propagation of a Penny-Shaped Hydraulic Fracture Parallel to the Free-Surface of an Elastic Half-Space
,” Int. J. Fract.
, 115
(2
), pp. 125
–158
.4.
Joubert
, P. J.
, 2010
, “Microseismic Monitoring of Hydraulic Fractures in Block Cave Mines
,” J. Min. Technol.
, 119
(3
), pp. 193
–197
.5.
Haimson
, B. C.
, and Cornet
, F. H.
, 2003
, “ISRM Suggested Methods for Rock Stress Estimation—Part 3: Hydraulic Fracturing (HF) and/or Hydraulic Testing of Pre-Existing Fractures (HTPF)
,” Int. J. Rock Mech. Min. Sci.
, 40
(7–8
), pp. 1011
–1020
.6.
Fomin
, S.
, Hashida
, T.
, Shimizu
, A.
, Matsuki
, K.
, and Sakaguchi
, K.
, 2003
, “Fractal Concept in Numerical Simulation of Hydraulic Fracturing of the Hot Dry Rock Geothermal Reservoir
,” Hydrol. Processes
, 17
(14
), pp. 2975
–2989
.7.
Legarth
, B.
, Huenges
, E.
, and Zimmermann
, G.
, 2005
, “Hydraulic Fracturing in a Sedimentary Geothermal Reservoir: Results and Implications
,” Int. J. Rock Mech. Min. Sci.
, 42
(7–8
), pp. 1028
–1041
.8.
Laubie
, H.
, and Ulm
, F.-J.
, 2014
, “Plane-Strain Crack Problem in Transversely Isotropic Solids for Hydraulic Fracturing Applications
,” ASCE J. Eng. Mech.
, 140
(12
), p. 04014092
.9.
Zhou
, Z.
, Abass
, H.
, Li
, X.
, Bearinger
, D.
, and Frank
, W.
, 2016
, “Mechanisms of Imbibition During Hydraulic Fracturing in Shale Formations
,” J. Pet. Sci. Eng.
, 141
, pp. 125
–132
.10.
Hu
, J.
, and Garagash
, D. I.
, 2010
, “Plane-Strain Propagation of a Fluid-Driven Crack in a Permeable Rock With Fracture Toughness
,” ASCE J. Eng. Mech.
, 136
(9
), pp. 1152
–1166
.11.
Detournay
, E.
, 2016
, “Mechanics of Hydraulic Fractures
,” Annu. Rev. Fluid Mech.
, 48
(1
), pp. 311
–339
.12.
Khristianovic
, S. A.
, and Zheltov
, Y. P.
, 1955
, “Formation of Vertical Fractures by Means of Highly Viscous Liquid
,” 4th World Petroleum Congress, Rome, Italy, June 6–15, Vol. II, SPE
Paper No. WPC-6132.13.
Perkins
, T. K.
, and Kern
, L. R.
, 1961
, “Widths of Hydraulic Fractures
,” J. Pet. Technol.
, 13
(9
), pp. 937
–949
.14.
Geertsma
, J.
, and De Klerk
, F.
, 1969
, “A Rapid Method of Predicting Width and Extent of Hydraulically Induced Fractures
,” J. Pet. Technol.
, 21
(12
), pp. 1571
–1581
.15.
Hubbert
, M. K.
, and Willis
, D. G.
, 1972
, “Mechanics of Hydraulic Fracturing
,” Mem. Am. Assoc. Pet. Geol.
, 18
(6
), pp. 239
–257
.16.
Nordgren
, R. P.
, 1972
, “Propagation of a Vertical Hydraulic Fracture
,” Soc. Pet. Eng. J.
, 12
(4
), pp. 306
–314
.17.
Geertsma
, J.
, and Haafkens
, R.
, 1979
, “A Comparison of the Theories for Predicting Width and Extent of Vertical Hydraulically Induced Fractures
,” ASME J. Energy Resour. Technol.
, 101
(1
), pp. 8
–19
.18.
Spence
, D. A.
, and Sharp
, P.
, 1985
, “Self-Similar Solutions for Elastohydrodynamic Cavity Flow
,” Proc. R. Soc. London, Ser. A
, 400
(1819
), pp. 289
–313
.19.
Desroches
, J.
, Detournay
, E.
, Lenoach
, B.
, Papanastasiou
, P.
, Pearson
, J. R. A.
, Thiercelin
, M.
, and Cheng
, A.
, 1994
, “The Crack Tip Region in Hydraulic Fracturing
,” Proc. R. Soc. London, Ser. A
, 447
(1929
), pp. 39
–48
.20.
Lenoach
, B.
, 1995
, “The Crack Tip Solution for Hydraulic Fracturing in a Permeable Solid
,” J. Mech. Phys. Solids
, 43
(7
), pp. 1025
–1043
.21.
Detournay
, E.
, 2004
, “Propagation Regimes of Fluid-Driven Fractures in Impermeable Rocks
,” Int. J. Geomech.
, 4
(1
), pp. 35
–45
.22.
Garagash
, D. I.
, 2006
, “Plane-Strain Propagation of a Fluid-Driven Fracture During Injection and Shut-In: Asymptotics of Large Toughness
,” Eng. Fract. Mech.
, 73
(4
), pp. 456
–481
.23.
Adachi
, J. I.
, and Detournay
, E.
, 2008
, “Plane Strain Propagation of a Hydraulic Fracture in a Permeable Rock
,” Eng. Fract. Mech.
, 75
(16
), pp. 4666
–4694
.24.
Bunger
, A. P.
, 2013
, “Analysis of the Power Input Needed to Propagate Multiple Hydraulic Fractures
,” Int. J. Solids Struct.
, 50
(10
), pp. 1538
–1549
.25.
Savitski
, A. A.
, and Detournay
, E.
, 2002
, “Propagation of a Penny-Shaped Fluid-Driven Fracture in an Impermeable Rock: Asymptotic Solutions
,” Int. J. Solids Struct.
, 39
(26
), pp. 6311
–6337
.26.
Bunger
, A. P.
, Detournay
, E.
, and Garagash
, D. I.
, 2005
, “Toughness-Dominated Hydraulic Fracture With Leak-Off
,” Int. J. Fract.
, 134
(2
), pp. 175
–190
.27.
Bunger
, A. P.
, and Detournay
, E.
, 2007
, “Early-Time Solution for a Radial Hydraulic Fracture
,” ASCE J. Eng. Mech.
, 133
(5
), pp. 534
–540
.28.
Lecampion
, B.
, and Desroches
, J.
, 2015
, “Simultaneous Initiation and Growth of Multiple Radial Hydraulic Fractures From a Horizontal Wellbore
,” J. Mech. Phys. Solids
, 82
(2
), pp. 235
–258
.29.
Kresse
, O.
, Weng
, X. W.
, Gu
, H. R.
, and Wu
, R. T.
, 2013
, “Numerical Modeling of Hydraulic Fractures Interaction in Complex Naturally Fractured Formations
,” Rock Mech. Rock Eng.
, 46
(3
), pp. 555
–568
.30.
Cheng
, C.
, and Bunger
, A. P.
, 2016
, “Rapid Simulation of Multiple Radially Growing Hydraulic Fractures Using an Energy-Based Approach
,” Int. J. Numer. Anal. Methods Geomech.
, 40
(7
), pp. 1007
–1022
.31.
Zeng
, Q. L.
, Wang
, T.
, Liu
, Z. L.
, and Zhuang
, Z.
, 2017
, “Simulation-Based Unitary Fracking Condition and Multiscale Self-Consistent Fracture Network Formation in Shale
,” ASME J. Appl. Mech.
, 84
(5
), p. 051004
.32.
Adachi
, J.
, 2001
, “Fluid-Driven Fracture in Permeable Rock
,” Ph.D. thesis
, University of Minnesota, Minneapolis, MN.33.
Howard
, G. C.
, and Fast
, C. R.
, 1957
, “Optimum Fluid Characteristics for Fracture Extension
,” Drilling and Production Practices
, American Petroleum Institute
, New York
, pp. 261
–270
.34.
Anderson
, T. L.
, 2005
, Fracture Mechanics: Fundamentals and Applications
, CRC Press
, Boca Raton, FL
, Chap. 2.35.
Bunger
, A. P.
, Gordeliy
, E.
, and Detournay
, E.
, 2013
, “Comparison Between Laboratory Experiments and Coupled Simulations of Saucer-Shaped Hydraulic Fractures in Homogeneous Brittle-Elastic Solids
,” J. Mech. Phys. Solids
, 61
(7
), pp. 1636
–1654
.Copyright © 2017 by ASME
You do not currently have access to this content.
