It is shown that the elastic field due to nonuniform temperature or a coherently misfitting inclusion in a semi-infinite region can be derived simply from the corresponding field in an infinite region. This follows from the work of Mindlin and Cheng [J. Appl. Phys. 21, 931 (1950)] but it is not necessary to calculate the thermoelastic potential itself. In particular, the displacement of the free surface is the same as that of the equivalent plane in an infinite solid, increased by a factor of 4(1−ν). The change in volume associated with the distortion of the surface is reduced by a factor of 2(1+ν)/3 from the free expansion of the inclusion. A rectangular inclusion is used to illustrate the theory.
Elastic Field in a Semi-Infinite Solid due to Thermal Expansion or a Coherently Misfitting Inclusion
email@example.com; URL: www.elec.gla.ac.uk/ ˜davies
Contributed by the Applied Mechanics Division of THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS for publication in the ASME JOURNAL OF APPLIED MECHANICS. Manuscript received by the ASME Applied Mechanics Division, Apr. 12, 2002; final revision, Jan. 21, 2003. Associate Editor: J. R. Barber. Discussion on the paper should be addressed to the Editor, Prof. Robert M. McMeeking, Department of Mechanical and Environmental Engineering University of California—Santa Barbara, Santa Barbara, CA 93106-5070, and will be accepted until four months after final publication of the paper itself in the ASME JOURNAL OF APPLIED MECHANICS.
- Views Icon Views
- Share Icon Share
- Search Site
Davies, J. H. (October 10, 2003). "Elastic Field in a Semi-Infinite Solid due to Thermal Expansion or a Coherently Misfitting Inclusion ." ASME. J. Appl. Mech. September 2003; 70(5): 655–660. https://doi.org/10.1115/1.1602481
Download citation file: