Today in most cases crash absorber elements are made of metals. Those materials absorb the energy during a crash event by ductile plastification, as e.g. by buckling. Fiber reinforced polymers (FRP) offer due to their heterogenic structure several failure mechanisms for energy absorption under compressive load, such as fiber-break, matrix-break, delamination, fiber pull-out, fiber-matrix-interphase failure and friction processes. This in combination with the low density leads to significantly better specific energy absorption of FRP absorbers (50 J/g to 200 J/g FRP, 20 J/g steel, 40 J/g aluminum). But in case of tensile load fiber reinforced polymers break brittle and the energy absorption level is low. Today as a consequence of rising energy costs FRP with their good specific mechanic properties are used more and more also for crash relevant structures as in automobiles and aircrafts. For this applications a good crash behavior in both cases, compressive and tensile loading, is important. The integration of metal elements in FRP-structures offers the possibility to improve the tensile crash behavior of fiber reinforced polymers as the metal elements can prevent a catastrophic failure of the structure in case of FRP-break and distributes the load during tensile deformation on a larger FRP volume. The integration of shape memory alloys (SMA) with their pseudoplastic martensitic detwinning plateau allows for manufacturing of an “endless” crash absorber in case of tensile load. Required is a well dimensioned structure of shape memory alloys, e.g. a wire mesh, the FRP component and their interface. Doing so, it is possible to get huge number of breaks in the SMA reinforced FRP. The pseudoplastic detwinning plateau and the huge strain hardening of the SMA material ensure that after a FRP-break and the drop of the force level associated therewith the force level in the whole structure raises again so that another FRP-break is initiated. Also the reinforcement prevents a complete failure of the structure.

In this contribution we present a theoretical extrapolation of the behavior of these new hybrid structures under tensile loading, give an estimation of their potential and demonstrate a first experimental validation of this new concept.

This content is only available via PDF.
You do not currently have access to this content.